-20%
A/mm: | 30 |
---|---|
B/mm: | 8 |
C/mm: | 3,17 |
Selection category: | Spinning centerpiece electric flight |
Reisenauer middle piece 30/ 8 - shaft 3,17mm
incl. prop screws and stopnuts
and screws for spinner mounting
only for props with blade root 8mm
centered holes - only 29ers spinner cap
Ideal tool: Wera Hex Plus screwdriver 1.5 mm
Suitable prop gums: size XXS and XS
Reisenauer OFFSET 0° clamp-middle piece 30/8mm - shaft 3,17mm incl. screws
“ More perfect lying of most of the prop blades on the hull.
Suitable for REISENAUER spinner caps.
“ 30mm Clamp-middle piece offset 0° fits depending on prop-bend, width,
slope and hull shape on the caps with diameter 32 - 38 mm.
“ Precise guidance from Prop-gum (size XXS) with proven circumferential clamping of the shaft.
To adjust to the prop:
The cap cutouts slightly increase (approximately up to 4-6mm - mostly only necessary on one side).
If used instead "Dremel", knife or e.g. Lexan shears, please cap heated beforehand to avoid bursting.
incl. prop screws and stopnuts
and screws for spinner mounting
only for props with blade root 8mm
centered holes - only 29ers spinner cap
Ideal tool: Wera Hex Plus screwdriver 1.5 mm
Suitable prop gums: size XXS and XS
Reisenauer OFFSET 0° clamp-middle piece 30/8mm - shaft 3,17mm incl. screws
“ More perfect lying of most of the prop blades on the hull.
Suitable for REISENAUER spinner caps.
“ 30mm Clamp-middle piece offset 0° fits depending on prop-bend, width,
slope and hull shape on the caps with diameter 32 - 38 mm.
“ Precise guidance from Prop-gum (size XXS) with proven circumferential clamping of the shaft.
To adjust to the prop:
The cap cutouts slightly increase (approximately up to 4-6mm - mostly only necessary on one side).
If used instead "Dremel", knife or e.g. Lexan shears, please cap heated beforehand to avoid bursting.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
REISENAUER Präzisionsantriebe
Hochfellnstraße 68
83346 BERGEN
DEUTSCHLAND
Tel: +49/8662/409516
[email protected]
REISENAUER Center piece Turbo Spinner 30/8/3,17mm with clamp fastening offset 0°
Product number:
62295
Manufacturer number:
SM000237
€19.20*
% €23.99* (19.97% saved)In stock. Usually ships within 1 business day.
Additionally selected items:
A/mm: | 30 |
---|---|
B/mm: | 8 |
C/mm: | 3,17 |
Selection category: | Spinning centerpiece electric flight |
Reisenauer middle piece 30/ 8 - shaft 3,17mm
incl. prop screws and stopnuts
and screws for spinner mounting
only for props with blade root 8mm
centered holes - only 29ers spinner cap
Ideal tool: Wera Hex Plus screwdriver 1.5 mm
Suitable prop gums: size XXS and XS
Reisenauer OFFSET 0° clamp-middle piece 30/8mm - shaft 3,17mm incl. screws
“ More perfect lying of most of the prop blades on the hull.
Suitable for REISENAUER spinner caps.
“ 30mm Clamp-middle piece offset 0° fits depending on prop-bend, width,
slope and hull shape on the caps with diameter 32 - 38 mm.
“ Precise guidance from Prop-gum (size XXS) with proven circumferential clamping of the shaft.
To adjust to the prop:
The cap cutouts slightly increase (approximately up to 4-6mm - mostly only necessary on one side).
If used instead "Dremel", knife or e.g. Lexan shears, please cap heated beforehand to avoid bursting.
incl. prop screws and stopnuts
and screws for spinner mounting
only for props with blade root 8mm
centered holes - only 29ers spinner cap
Ideal tool: Wera Hex Plus screwdriver 1.5 mm
Suitable prop gums: size XXS and XS
Reisenauer OFFSET 0° clamp-middle piece 30/8mm - shaft 3,17mm incl. screws
“ More perfect lying of most of the prop blades on the hull.
Suitable for REISENAUER spinner caps.
“ 30mm Clamp-middle piece offset 0° fits depending on prop-bend, width,
slope and hull shape on the caps with diameter 32 - 38 mm.
“ Precise guidance from Prop-gum (size XXS) with proven circumferential clamping of the shaft.
To adjust to the prop:
The cap cutouts slightly increase (approximately up to 4-6mm - mostly only necessary on one side).
If used instead "Dremel", knife or e.g. Lexan shears, please cap heated beforehand to avoid bursting.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
REISENAUER Präzisionsantriebe
Hochfellnstraße 68
83346 BERGEN
DEUTSCHLAND
Tel: +49/8662/409516
[email protected]