Description:The new Turnado V3 Glider version fits seamlessly into our program for glider nose drives/FES. Due to the shaft extension with the built-in support bearing, this drive can also be installed in slim sailor's noses.
- Shaft can be moved easily by loosening the three M3 screws on the back. The model can be converted back to a glider within a very short time. E-flight and glider towing alternately possible.
- is based on the 1000-fold proven Hacker A50-Turnado
- free shaft with 6mm diameter, for the use of common prop drivers and scale spinners
Scope of application: Glider nose drive/FES:
- perfect as nose drive for launching on your own landing gear with small propeller.
- for gliders up to ~12kg: 6S Lipo, RFM 13x10, Master Mezon 120 lite (power consumption ~60-65A in flight)
- for gliders up to ~16kg: 6S LiPo, RFM 14x10, Master Mezon 120 lite (power consumption 70-75A in flight)
Technical data of the motor:- Idle current at 8.4V 1.2A
- Internal resistance 0,019 Ohm
- Recommended controller 80A-130A Brushless
- rec. timing 15°-20°
- Shaft diameter 6 mm (internal 8 mm)
- mounting thread M4, 25 / 30mm
Clues:- The A50 Turnado engine is not equipped with a prop driver. Since this motor is used for gliders with folding propellers, a wide range of different centre parts for folding propellers are used to match the model. These can be found in many variants under the tab "general accessories".
