Housing-Ø (mm): | 88,5 |
---|---|
Housing length (mm): | 65,5 |
LiPo (S): | 10 |
Propeller: | 20x13,5/20x14/21x13 |
Weight (g): | 620 |
Examples of use: | F3A-Kunstflug |
RPM/V: | 205 |
Engine-type: | External rotor |
recom. Controller: | 74-89A |
Innenwiderstand (mOhm): | 0,02 |
Number of poles: | 28 |
Leerlaufstrom (A): | 1,1 |
Weight category (g): | 500 to 750 |
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications:
Typische Setups:
PropXoar CFK 21x13
V / LiPo37V = 10S LiPo
Amp.74A
Power2738W
RPM6150
ControllerMaster Spin 99-Opto
Timing25°
PropMejzlik 20x14EL 3Bl.
V / LiPo37V = 10S LiPo
Amp.89A
Power3293W
RPM5910
ControllerMaster Spin 99-Opto
Timing25°
PropFalcon 20x13,5 3Bl.
V / LiPo37V = 10S LiPo
Amp.84A
Power3108W
RPM6030
ControllerMaster Spin 99-Opto
Timing25°
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications:
- Power rangemax. 3200W (15 sec.)
- Idle Current @ 8.4V1.1A
- Controller recommondationMasterSpin 99 Opto
- Timing recommondation25°
- Switching frequency8kHz
Typische Setups:
PropXoar CFK 21x13
V / LiPo37V = 10S LiPo
Amp.74A
Power2738W
RPM6150
ControllerMaster Spin 99-Opto
Timing25°
PropMejzlik 20x14EL 3Bl.
V / LiPo37V = 10S LiPo
Amp.89A
Power3293W
RPM5910
ControllerMaster Spin 99-Opto
Timing25°
PropFalcon 20x13,5 3Bl.
V / LiPo37V = 10S LiPo
Amp.84A
Power3108W
RPM6030
ControllerMaster Spin 99-Opto
Timing25°
HACKER
HACKER Q80-11 PSD kv205
Product number:
9793482
Manufacturer number:
38798518
€579.00*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Additionally selected items:
Housing-Ø (mm): | 88,5 |
---|---|
Housing length (mm): | 65,5 |
LiPo (S): | 10 |
Propeller: | 20x13,5/20x14/21x13 |
Weight (g): | 620 |
Examples of use: | F3A-Kunstflug |
RPM/V: | 205 |
Engine-type: | External rotor |
recom. Controller: | 74-89A |
Innenwiderstand (mOhm): | 0,02 |
Number of poles: | 28 |
Leerlaufstrom (A): | 1,1 |
Weight category (g): | 500 to 750 |
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications:
Typische Setups:
PropXoar CFK 21x13
V / LiPo37V = 10S LiPo
Amp.74A
Power2738W
RPM6150
ControllerMaster Spin 99-Opto
Timing25°
PropMejzlik 20x14EL 3Bl.
V / LiPo37V = 10S LiPo
Amp.89A
Power3293W
RPM5910
ControllerMaster Spin 99-Opto
Timing25°
PropFalcon 20x13,5 3Bl.
V / LiPo37V = 10S LiPo
Amp.84A
Power3108W
RPM6030
ControllerMaster Spin 99-Opto
Timing25°
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications:
- Power rangemax. 3200W (15 sec.)
- Idle Current @ 8.4V1.1A
- Controller recommondationMasterSpin 99 Opto
- Timing recommondation25°
- Switching frequency8kHz
Typische Setups:
PropXoar CFK 21x13
V / LiPo37V = 10S LiPo
Amp.74A
Power2738W
RPM6150
ControllerMaster Spin 99-Opto
Timing25°
PropMejzlik 20x14EL 3Bl.
V / LiPo37V = 10S LiPo
Amp.89A
Power3293W
RPM5910
ControllerMaster Spin 99-Opto
Timing25°
PropFalcon 20x13,5 3Bl.
V / LiPo37V = 10S LiPo
Amp.84A
Power3108W
RPM6030
ControllerMaster Spin 99-Opto
Timing25°