SAITO FA-182TD 2-cylinder Boxer 4T engine
Product number:
20960
Manufacturer number:
FA182TD
€719.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
- FA-182TD engine
- exhaust manifolds
- Alu engine mount
- english manual
| ccm: | 30 |
|---|---|
| HP: | 2,5 |
| RPM: | 2300-10000 |
| Weight (g): | 1040 g |
| Cylinder Type: | Ring |
| Incl. muffler: | yes |
The FA-182TD is not a true boxer engine, as both connecting rods are attached to one crankshaft journal. However, this design has the advantage
that the engine is simple in construction, lighter and more efficient. The double glow plug per cylinder improves control and response.
The double carburetor allows each cylinder to be adjusted individually for optimum performance.
This classic glow ignition engine fits for example very well the Piper Super Cub PA-18 from Hangar-9 with span 2,69m or similar models
Technical information:
“ Bore: 28.2 mm
“ Stroke: 24 mm
“ Propeller: 15x8" - 16x8"
Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.
that the engine is simple in construction, lighter and more efficient. The double glow plug per cylinder improves control and response.
The double carburetor allows each cylinder to be adjusted individually for optimum performance.
This classic glow ignition engine fits for example very well the Piper Super Cub PA-18 from Hangar-9 with span 2,69m or similar models
Technical information:
- Displ.: 30 cc
“ Bore: 28.2 mm
“ Stroke: 24 mm
- Weight: approx. 1040 g
- Practical speed: 2000 - 10000 rpm
“ Propeller: 15x8" - 16x8"
- Fuel: glow engine fuel with 10-20% Nitromethan
Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]
