Robbe Modellsport Monsun V2 PNP Styro/GfK/Abachi
Product number:
9778307
Manufacturer number:
2664
Robbe Modellsport RO-SAFETY LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€75.99*
€79.99*(5% saved)
Robbe Modellsport Hull bracket type "M" up to approx. 35mm for F3x or similar models
€11.19*
€13.99*(20.01% saved)
- Model Monsun V2 almost ready to fly prefabricated
- painted GRP/CfK fuselage with built-in Ro-Power Torque 3526-870 motor and two Robbe FS-277 servos
- ready-covered, Styro/GfK/Abachi wing with four built-in Robbe FS-277 servos
- ready Oracover covered, removable T-tail made of balsa
- aluminum spinner 38mm and CfK propeller 12x8"
- small parts (rudder horns, linkages, clevises, covers, etc.), but already completely installed
- Assembly instructions in German/English/French
| Wing-span (mm): | 3000 |
|---|---|
| Flight weight approx. (g): | 2950 |
| Control: | H,S,Q,M,WK |
| Length (mm): | 1480 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | Carbon/FiberGlass |
| Wings: | Styro/Fiberglass/Abachi |
| Rec. engine: | Ro-Power Torque 3526-870kv |
| Rec. Battery: | 4S/4200mAh LiXX |
| Version: | PNP - PLUG N PLAY |
| Airfoil: | HQ 2,5/9 |
| Flight Skill: | Advanced |
| Build Skill: | Beginners |
| Drive Type: | Electric |
The MONSUN V2 is the successor and the further development of the famous MONSUN. It is a thermal and all-round glider in the compact 3m class with 4-flap wing. The T-tail is hinged backlash-free with a directly installed servo.
The PNP version has servos already installed, electrical connector and original multilocks as wing locks.
The flight characteristics are very good-natured. The MONSUN V2 can be flown as a slow thermal glider or as an all-rounder.
The ready-covered wings are constructed of styro core, glass fiber layers, abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved.
The MONSUN V2 is suitable for advanced model pilots.
Features:
Das Produkt Monsun V2 PNP Styro/GfK/Abachi von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3000 sowie ein Gewicht von 2950. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als PNP - PLUG N PLAY ausgeführt . Wir empfehlen einen 4S/4200mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The PNP version has servos already installed, electrical connector and original multilocks as wing locks.
The flight characteristics are very good-natured. The MONSUN V2 can be flown as a slow thermal glider or as an all-rounder.
The ready-covered wings are constructed of styro core, glass fiber layers, abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved.
The MONSUN V2 is suitable for advanced model pilots.
Features:
- two-part, ready Oracovered Styro/GfK/Abachi surface with CfK connection
- continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
- built-in digital Robbe servos FS-277 with ball bearings and metal gearbox (PNP only)
- ready-made wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
- ready ironed rudder flaps with mounted rudder horns
- painted GRP fuselage with built-in wooden formers and CfK reinforcements
- powerful Ro-Power Torque 3526 870 K/V outrunner, optimized for 4S (PNP only)
- large canopy for easy battery change and RC installation
- ready hinged rudder flaps
- prefabricated rudder linkages with linkage parts from German production
- pre-cut servo well and linkage covers
- anodized 38mm aluminum spinner with straight center section (PNP only)
- high-strength carbon fiber airscrew 12x8" (PNP only)
- modern, highly visible design
Das Produkt Monsun V2 PNP Styro/GfK/Abachi von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3000 sowie ein Gewicht von 2950. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als PNP - PLUG N PLAY ausgeführt . Wir empfehlen einen 4S/4200mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]