STAUFENBIEL
STAUFENBIEL EPSILON XL3 4000MM PNP (WITH INTEGRATED MOTOR, SERVOS, MULTILOCK)
Product number:
9744587
Manufacturer number:
HSF0314054PV3X
painted GRP fuselage
4-part polystyrene surface covered with Abachi wood
2x Dymond DS 1550 MG DS and 4x Dymond D 260 MG fully assembled in servo frame
Built-in motor HIMAX 4226-570KV with 950 Watt
4-part polystyrene surface covered with Abachi wood
2x Dymond DS 1550 MG DS and 4x Dymond D 260 MG fully assembled in servo frame
Built-in motor HIMAX 4226-570KV with 950 Watt
| Wingspan: | 4000 mm |
|---|---|
| Control: | H,S,Q,M |
| Weight: | 4000g |
| Manufacturer: | Horizon |
| Fuselage: | GFK |
| Wings: | Styro/Balsa |
| Rec. engine: | BL Outrunner |
| Rec. Battery: | 4S/4000-5000mAh LiXX |
| Version: | PNP - PLUG N PLAY |
| Fly / Build: | 21.jpg |
| Drive Type: | Electric |
Gentle giant in a new guise
The EPSILON models are one of the most successful glider model ranges of the last few decades. EPSILON is now available in a variety of sizes and designs - and now the largest model in the range is getting a new look. The EPSILON XL3.
Powerful in thermals
The wings have a high-power and high-performance MH-32 profile specially designed for thermal flight. Due to the low wing load of the EPSILON XL3, a slow descent is achieved, while the profile guarantees the necessary power at high speeds.
Gentle landings and easy takeoffs
The 4m model can be landed gently and precisely in the butterfly position even in tight spaces thanks to its non-problematic slow flying characteristics and plain flaps. Furthermore, manual launches can be easily performed unaided due to the powerful drive.
High-quality construction
The fuselage of the EPSILON XL3 consists of red stained fibreglass and features a stabiliser on the tailplane. The wing, which is covered with ORACOVER®, has a Styrofoam core and is clad with high-quality abachi wood, providing a solid and hard surface. Both the fuselage and the surfaces are reinforced at key points with carbon fibre. The built-in motor bulkhead and rudder horns are made of aluminium, the wing torsion bars of high-quality fibre-glass. In addition, the geometry of the EPSILON XL3 side rudder linkage has been improved.
Little construction effort
Whether in the "naked" ARF version or the almost-ready-to-fly PNP version - both versions display an extremely high degree of pre-fabrication, so that little construction effort is required.
Secured areas (PNP version)
Thanks to the pre-installed MPX Multilock system, the wings provide the necessary support. Pre-installed MPX plug connections in the wings make it easier to join the servo cables together.
Powerful motor (PNP Version)
The PNP version of the EPSILON XL3 has a built-in HIMAX high-performance motor with a diameter of 42 mm, a length of 60 mm, 570 kV and 950 watts. The scope of supply also includes the enclosed aluminium spinner and Aeronaut 16 x 8" folding propeller. In addition, the PNP version has six digital servos with metal gearbox already installed and wired in the servo frames.
New look
The EPSILON XL3 now has a new, fresh and more up-to-date look. The GRP fuselage is painted red and the wings covered with an appealing décor. On the underside of the wings there are high-contrast block stripes, which enable the pilot to readily detect the orientation of his or her model.
A lot of glider for a low price
Like the other members of this range, the EPSILON XL3 will impress any glider enthusiast with its price/ performance ratio. Find out more about the Staufenbiel EPSILON XL3.
Features
Das Produkt EPSILON XL3 4000MM PNP (MIT EINGEBAUTEM von STAUFENBIEL in der Kategorie Electric Glider Models hat eine Spannweite von 4000 mm sowie ein Gewicht von 4000g. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M. Das Modell ist als PNP - PLUG N PLAY ausgeführt und ist für Fortgeschrittene geeignet. Die Fertigstellung des Modells ist für Modellbau-Einsteiger ohne Vorkenntnisse einfach möglich. Wir empfehlen einen 4S/4000-5000mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The EPSILON models are one of the most successful glider model ranges of the last few decades. EPSILON is now available in a variety of sizes and designs - and now the largest model in the range is getting a new look. The EPSILON XL3.
Powerful in thermals
The wings have a high-power and high-performance MH-32 profile specially designed for thermal flight. Due to the low wing load of the EPSILON XL3, a slow descent is achieved, while the profile guarantees the necessary power at high speeds.
Gentle landings and easy takeoffs
The 4m model can be landed gently and precisely in the butterfly position even in tight spaces thanks to its non-problematic slow flying characteristics and plain flaps. Furthermore, manual launches can be easily performed unaided due to the powerful drive.
High-quality construction
The fuselage of the EPSILON XL3 consists of red stained fibreglass and features a stabiliser on the tailplane. The wing, which is covered with ORACOVER®, has a Styrofoam core and is clad with high-quality abachi wood, providing a solid and hard surface. Both the fuselage and the surfaces are reinforced at key points with carbon fibre. The built-in motor bulkhead and rudder horns are made of aluminium, the wing torsion bars of high-quality fibre-glass. In addition, the geometry of the EPSILON XL3 side rudder linkage has been improved.
Little construction effort
Whether in the "naked" ARF version or the almost-ready-to-fly PNP version - both versions display an extremely high degree of pre-fabrication, so that little construction effort is required.
Secured areas (PNP version)
Thanks to the pre-installed MPX Multilock system, the wings provide the necessary support. Pre-installed MPX plug connections in the wings make it easier to join the servo cables together.
Powerful motor (PNP Version)
The PNP version of the EPSILON XL3 has a built-in HIMAX high-performance motor with a diameter of 42 mm, a length of 60 mm, 570 kV and 950 watts. The scope of supply also includes the enclosed aluminium spinner and Aeronaut 16 x 8" folding propeller. In addition, the PNP version has six digital servos with metal gearbox already installed and wired in the servo frames.
New look
The EPSILON XL3 now has a new, fresh and more up-to-date look. The GRP fuselage is painted red and the wings covered with an appealing décor. On the underside of the wings there are high-contrast block stripes, which enable the pilot to readily detect the orientation of his or her model.
A lot of glider for a low price
Like the other members of this range, the EPSILON XL3 will impress any glider enthusiast with its price/ performance ratio. Find out more about the Staufenbiel EPSILON XL3.
Features
- painted GFR fuselage
- 4-piece Styrofoam surface lined with abachi wood
- with plain flaps and stabiliser
- improved side rudder linkage
- covered with original ORACOVER® film
- built-in aluminium motor bulkhead for motors with a diameter of up to 42 mm
- built-in rudder horns made of aluminium
- built-in wing torsion bars made of GRP
- carbon fibre reinforcements in the fuselage and wings
- original MPX Multilock wing locking system installed (only PNP version)
- built-in HIMAX 4226-570KV motor with 950 watts (only PNP version)
- including CAM Prop 16x8" and aluminium spinner (only PNP version)
- 2 Dymond DS 1550 MG and 4 Dymond D 260 MG pre-installed in servo frames (only PNP version)
- pre-installed cable harness with MPX plug connection and locked servo connections (only PNP version)
- installation instructions with lots of pictures in German, English and French
Das Produkt EPSILON XL3 4000MM PNP (MIT EINGEBAUTEM von STAUFENBIEL in der Kategorie Electric Glider Models hat eine Spannweite von 4000 mm sowie ein Gewicht von 4000g. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M. Das Modell ist als PNP - PLUG N PLAY ausgeführt und ist für Fortgeschrittene geeignet. Die Fertigstellung des Modells ist für Modellbau-Einsteiger ohne Vorkenntnisse einfach möglich. Wir empfehlen einen 4S/4000-5000mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar