rs-aero FXj 2.5 wooden kit thermal model with 4-flap surface as glider, or electric model
Product number:
9790860
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 100G EACH 50G RESIN+HARDENER
Content: 0.1 kg (€119.90* / 1 kg)
€11.99*
- Wooden construction kit made from CNC laser-cut components
| Wing-span (mm): | 2540 |
|---|---|
| Flight weight approx. (g): | 850 |
| Control: | H,S,Q,(M),WK |
| Length (mm): | 1180 |
| Manufacturer: | rs-aero |
| Fuselage: | Wood |
| Wings: | Wood/rib construction |
| Rec. engine: | Joker 2830-9,5 |
| Rec. Battery: | 3S/1450mAh LiXX A-slim |
| Version: | KIT |
| Airfoil: | AG36 |
| Flight Skill: | Advanced |
| Build Skill: | Professional |
| Drive Type: | Electric |
The FXj is an independent development, which fits optically as well as performance into the class of the f5j-400 class.
The plane is specifically designed for thermal flying in the plane.
The thermals can be started by high start with rubber (RES set), with built-in electric motor or simply by hand on a slightly sloping meadow.
The model is supplied as a complete kit, including the entire wiring for the area servos. It is possible to install a 22mm drive or a 28mm motor.
The necessary components and the necessary construction steps are described in the respective construction phase in the building instructions.
A color printed blueprint and all necessary small parts are also part of the kit equipment as well as two sheets of sandpaper and the protective film for the plan.
In any case, a model where the fun factor is not neglected.The construction also allows one or the other aerobatics.
The 4-flap wing allows for precise landings in the butterfly position. The landing approaches are then possible in a 60° descent at a slightly higher step speed.
For those who are looking for something special :-)
A plane for the advanced model maker and model pilot.
Required accessories:
Drive variant 1:
Drive variant 2:
Das Produkt FXj 2.5 Holzbausatz Thermikmodell mit von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2540 sowie ein Gewicht von 850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,(M),WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1450mAh LiXX A-slim Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The plane is specifically designed for thermal flying in the plane.
The thermals can be started by high start with rubber (RES set), with built-in electric motor or simply by hand on a slightly sloping meadow.
The model is supplied as a complete kit, including the entire wiring for the area servos. It is possible to install a 22mm drive or a 28mm motor.
The necessary components and the necessary construction steps are described in the respective construction phase in the building instructions.
A color printed blueprint and all necessary small parts are also part of the kit equipment as well as two sheets of sandpaper and the protective film for the plan.
In any case, a model where the fun factor is not neglected.The construction also allows one or the other aerobatics.
The 4-flap wing allows for precise landings in the butterfly position. The landing approaches are then possible in a 60° descent at a slightly higher step speed.
For those who are looking for something special :-)
A plane for the advanced model maker and model pilot.
Required accessories:
Drive variant 1:
- HACKER A10-7L with gearbox
- Spinner 30mm diameter
- Propeller 13x7
- Controller with 20A continuous power and at least 2A BEC
- Drive battery - Turnigy 3s1000mA or 3s1200mA (slim)
Drive variant 2:
- Joker 2830-9.5
- Spinner 34 or 35mm diameter
- Propeller 10x6
- Controller with 20A continuous power and at least 2A BEC
- Drive battery - Turnigy 3s1000mA to 3s1450 (Hacker slim)
- 4 Surface servo- for example Graupner DES-427, DES-428 or TGY-5252mg
- 2 Fuselage servos - for example Graupner DES-427, TGY EX5201 or HS-45
- 7 Channel receiver
- 3m foil (oralight)
Das Produkt FXj 2.5 Holzbausatz Thermikmodell mit von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2540 sowie ein Gewicht von 850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,(M),WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1450mAh LiXX A-slim Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Robert Scheibelhofer
Flugmodellbau / rs-aero
Am Kalvarienberg 3
7423 Pinkafeld
ÖSTERREICH