The kit comes as a complete kit including all small parts for the rudder linkages and also the surface cabling with the required connectors. The components for the E-Version are also included, as well as a pre-mounted tail unit that has the pendulum rudder lever installed. A colorfully plotted blueprint and a detailed building instruction in paper are also included, as well as two sheets of sandpaper of different grain.
Recommended accessories (not included)::
Recommended accessories (not included)::
- Servos - 6 pcs Robbe FS 166 BB MG or equivalent
- Motor: eg Joker 2834-6.5
- Propeller: 10x6 or 11x6
- Controller - Robbe RoControl 40(55)A/3A BEC
- Spinner - 34-36mm diameter
- Drive battery: 3s1000mA to 3s2400mA
Wing-span (mm): | 2040 |
---|---|
Flight weight approx. (g): | 900-1300 |
Control: | H,S,Q,M,WK |
Length (mm): | 1140 |
Manufacturer: | rs-aero |
Fuselage: | Wood |
Wings: | Wood/rib construction |
Rec. engine: | BL Joker 2834-6,5 |
Rec. Battery: | 3S/1000-2400mAh LiXX |
Version: | KIT |
Airfoil: | HQW 1,5/9 mod. |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Electric |
The rock4k-X covers a wide range of all-round capabilities. With its 4-flap wing, the model can be perfectly adjusted to the prevailing conditions. The model can be built as a glider or electric glider.
Due to its low weight, the rock4k-X responds very well to thermals. The altitude gained can then be used to perform various aerobatic figures. The limits of what is possible are clearly set by the pilot.
With the removable pendulum tailplane, the 4k-X can now also be easily packed in a backpack for trips to the mountains. The strength of the model ensures that the fun factor is not compromised. Unforgettable moments and flying experiences are guaranteed. Quick transitions from one thermal bubble to another are made easier with the speed setting of the camber flaps, without losing much altitude. Landing in butterfly mode becomes a breeze with the right mix of elevator control, achieving a stress-free speed like on rails. It's just right for small landing fields.
The model is entirely constructed from wood and reinforced in the appropriate areas with plywood and pine strips.
A model that will captivate you.
Specifications:
Das Produkt rock4k-X Holzbausatz mit K-Leitwerk von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2040 sowie ein Gewicht von 900-1300. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1000-2400mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
Due to its low weight, the rock4k-X responds very well to thermals. The altitude gained can then be used to perform various aerobatic figures. The limits of what is possible are clearly set by the pilot.
With the removable pendulum tailplane, the 4k-X can now also be easily packed in a backpack for trips to the mountains. The strength of the model ensures that the fun factor is not compromised. Unforgettable moments and flying experiences are guaranteed. Quick transitions from one thermal bubble to another are made easier with the speed setting of the camber flaps, without losing much altitude. Landing in butterfly mode becomes a breeze with the right mix of elevator control, achieving a stress-free speed like on rails. It's just right for small landing fields.
The model is entirely constructed from wood and reinforced in the appropriate areas with plywood and pine strips.
A model that will captivate you.
Specifications:
- Wing loading: from 30 g/dm²
- Control: Aileron, Elevator, Rudder, Camber Flaps, Motor
- Airfoil: HQW 1.5/9 mod.
Das Produkt rock4k-X Holzbausatz mit K-Leitwerk von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2040 sowie ein Gewicht von 900-1300. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1000-2400mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Robert Scheibelhofer
Flugmodellbau / rs-aero
Am Kalvarienberg 3
7423 Pinkafeld
ÖSTERREICH
rs-aero rock4k-X wooden kit with K-tail in balsa plywood construction
Product number:
9793949
Manufacturer number:
rock4k-X
Additionally selected items:
The kit comes as a complete kit including all small parts for the rudder linkages and also the surface cabling with the required connectors. The components for the E-Version are also included, as well as a pre-mounted tail unit that has the pendulum rudder lever installed. A colorfully plotted blueprint and a detailed building instruction in paper are also included, as well as two sheets of sandpaper of different grain.
Recommended accessories (not included)::
Recommended accessories (not included)::
- Servos - 6 pcs Robbe FS 166 BB MG or equivalent
- Motor: eg Joker 2834-6.5
- Propeller: 10x6 or 11x6
- Controller - Robbe RoControl 40(55)A/3A BEC
- Spinner - 34-36mm diameter
- Drive battery: 3s1000mA to 3s2400mA
Wing-span (mm): | 2040 |
---|---|
Flight weight approx. (g): | 900-1300 |
Control: | H,S,Q,M,WK |
Length (mm): | 1140 |
Manufacturer: | rs-aero |
Fuselage: | Wood |
Wings: | Wood/rib construction |
Rec. engine: | BL Joker 2834-6,5 |
Rec. Battery: | 3S/1000-2400mAh LiXX |
Version: | KIT |
Airfoil: | HQW 1,5/9 mod. |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Electric |
The rock4k-X covers a wide range of all-round capabilities. With its 4-flap wing, the model can be perfectly adjusted to the prevailing conditions. The model can be built as a glider or electric glider.
Due to its low weight, the rock4k-X responds very well to thermals. The altitude gained can then be used to perform various aerobatic figures. The limits of what is possible are clearly set by the pilot.
With the removable pendulum tailplane, the 4k-X can now also be easily packed in a backpack for trips to the mountains. The strength of the model ensures that the fun factor is not compromised. Unforgettable moments and flying experiences are guaranteed. Quick transitions from one thermal bubble to another are made easier with the speed setting of the camber flaps, without losing much altitude. Landing in butterfly mode becomes a breeze with the right mix of elevator control, achieving a stress-free speed like on rails. It's just right for small landing fields.
The model is entirely constructed from wood and reinforced in the appropriate areas with plywood and pine strips.
A model that will captivate you.
Specifications:
Das Produkt rock4k-X Holzbausatz mit K-Leitwerk von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2040 sowie ein Gewicht von 900-1300. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1000-2400mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
Due to its low weight, the rock4k-X responds very well to thermals. The altitude gained can then be used to perform various aerobatic figures. The limits of what is possible are clearly set by the pilot.
With the removable pendulum tailplane, the 4k-X can now also be easily packed in a backpack for trips to the mountains. The strength of the model ensures that the fun factor is not compromised. Unforgettable moments and flying experiences are guaranteed. Quick transitions from one thermal bubble to another are made easier with the speed setting of the camber flaps, without losing much altitude. Landing in butterfly mode becomes a breeze with the right mix of elevator control, achieving a stress-free speed like on rails. It's just right for small landing fields.
The model is entirely constructed from wood and reinforced in the appropriate areas with plywood and pine strips.
A model that will captivate you.
Specifications:
- Wing loading: from 30 g/dm²
- Control: Aileron, Elevator, Rudder, Camber Flaps, Motor
- Airfoil: HQW 1.5/9 mod.
Das Produkt rock4k-X Holzbausatz mit K-Leitwerk von rs-aero in der Kategorie Electric Glider Models hat eine Spannweite von 2040 sowie ein Gewicht von 900-1300. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1000-2400mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Robert Scheibelhofer
Flugmodellbau / rs-aero
Am Kalvarienberg 3
7423 Pinkafeld
ÖSTERREICH