AERONAUT DELTA 24 TRIGON
Product number:
9799869
Manufacturer number:
131700
| Wing-span (mm): | 930 |
|---|---|
| Flight weight approx. (g): | 1400 |
| Control: | H,Q,M |
| Length (mm): | 810 |
| Manufacturer: | Aeronaut |
| Fuselage: | Wood |
| Wings: | Wood |
| Rec. Battery: | 4S |
| Version: | KIT |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
| Impellergrösse (mm): | 80 |
Delta 24 Trigon is a sleek and compact impeller model in conventional wood construction. The model is designed for the Mini-Fan evo from WeMoTec, an impeller with a diameter of 69 mm. With a suitable choice of drive, a thrust/weight ratio of approximately 1:1 is possible.
The Mini-Fan evo / HET 2W22 impeller set in conjunction with the MF D8 nozzle adapted to the drive is an ideal drive for the Delta 24 trigons. The drive supplies 11.8 N thrust to 4S-LiPo, the current remains below 50 A.
Batteries with a capacity of 3,000 mAh promise a good combination of low take-off weight and long flight time. An addition of ballast to adjust the center of gravity is not required in this design.
The construction takes place on the slipway typical for aero-naut models, the construction succeeds quickly and easily. The detailed construction instructions show and describe the individual construction steps and leave no question unanswered. Nevertheless, experience with fast RC models is required for the construction and especially the flying of the model.
Technical data:
x Over the past 30 years, the company Aeronaut has been distributed from Modellbau Lindinger due to high quality products and services. The name "Aeronaut", based from the Greek Symbol for air and water, was chosen for the company in the 1970's as they stepped into the RC industry. Aeronaut is well known for self-designed and manufactured products, for example, the CAMCarbon Folding Propeller.
The Mini-Fan evo / HET 2W22 impeller set in conjunction with the MF D8 nozzle adapted to the drive is an ideal drive for the Delta 24 trigons. The drive supplies 11.8 N thrust to 4S-LiPo, the current remains below 50 A.
Batteries with a capacity of 3,000 mAh promise a good combination of low take-off weight and long flight time. An addition of ballast to adjust the center of gravity is not required in this design.
The construction takes place on the slipway typical for aero-naut models, the construction succeeds quickly and easily. The detailed construction instructions show and describe the individual construction steps and leave no question unanswered. Nevertheless, experience with fast RC models is required for the construction and especially the flying of the model.
Technical data:
- Area of about 42 dm²
- Surface load from approx. 33 g/dm²
- RC functions Height/Cross (mixed) Motor
x Over the past 30 years, the company Aeronaut has been distributed from Modellbau Lindinger due to high quality products and services. The name "Aeronaut", based from the Greek Symbol for air and water, was chosen for the company in the 1970's as they stepped into the RC industry. Aeronaut is well known for self-designed and manufactured products, for example, the CAMCarbon Folding Propeller.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
aero-naut Modellbau
GmbH & Co. KG
Stuttgarter Straße 18-22
72766 REUTLINGEN
DEUTSCHLAND
Tel: 0049/7121/4330880
[email protected]