FREEWING AL37 Airliner PNP Twin 70mm Jet EDF
Product number:
9801531
Manufacturer number:
FJ31513P
Robbe Modellsport RO-SAFETY LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€75.99*
€79.99*(5% saved)
- EPO Modell formgeschäumt, fertig lackiert
- 2x 70mm E-Impeller 12-Blatt
- 2x BL Inrunner 2952-2100KV Motor
- 2 60A Regler mit 5A UBEC
- 4x 9g Digital Hybrid Servo
- 6x 9g Digital MG Servo
- Einziehfahrwerk elektrisch
- Multi-Function Control Box E (MCB-E)
- Alufederbeine
- Montageanleitung in englischer Sprache
| Wing-span (mm): | 1830 |
|---|---|
| Empty weight approx. (g): | 3350 |
| Control: | H,S,Q,M,LK,EZFW |
| Length (mm): | 2000 |
| Manufacturer: | Freewing |
| Fuselage: | EPO |
| Wings: | EPO |
| Rec. engine: | 2952-2100KV Inrunner Motor ×2 |
| Rec. Battery: | 6S/4000-6000mAh LiXX |
| Version: | PNP - PLUG N PLAY |
| Flight Skill: | Advanced |
| Build Skill: | Beginners |
| Drive Type: | Electric |
| Impellergrösse (mm): | 70 |
This version of the AL37 Airliner does NOT come with the decals pre-applied; however, the full decal set is included in the box. This version is intended for customers who wish to customize their airliner graphics.
Freewing Model is excited to release Freewing's first twin-engine passenger EDF jet! Introducing the twin 70mm Freewing AL37 Airliner. With a length of 2000mm (78.75") and a wingspan of 1830mm (72 inch ), it's the largest EDF produced by Freewing to date. This model uses EPO foam with integrated aluminum carbon to strengthen the airframe while limiting the weight of the model to the greatest possible extent. Except for the foam fuselage, all the other components require only screws to complete an easy assembly.
A control board with ribbon wire is used to simplify the wires between the main wing and the fuselage for easy assembly and disassembly for transport. The built-in wiring channel of the main wing is easy to use and retains the overall scale appearance of this gorgeous airliner. Add to it 11 pre-installed LED lights throughout the aircraft and you will love taking leisure flights at dawn and dusk with this AL37 airliner.
The Freewing AL37 Airliner uses two 3048-2150KV brushless outrunners housed in 70mm EDF casing with 12-blade fans. Those are powered by two 60A brushless ESC and need just one 6S LiPo to limit weight and allow this airliner to cruise comfortably at less than half throttle. In the case of a 6S 5000mAh battery, the maximum flight time can stretch to potentially 10 minutes with the proper throttle usage.
The front and rear landing gears are made of aluminum alloy and have shock absorption function and will make scale landings on the mains an enjoyable experience with each and every flight. Also, the larger size of the wheels (Nose wheel diameter: 45mm, Main wheel diameter: 70mm) make take-offs and landings a breeze in most grassland environments. This model has a beautiful air posture, and good stability in high and low speed. It is very suitable for an immersive flight like FPV and is an excellent leisurely flyer that every EDF jet pilot can enjoy.
FEATURES:
x
Freewing Model is excited to release Freewing's first twin-engine passenger EDF jet! Introducing the twin 70mm Freewing AL37 Airliner. With a length of 2000mm (78.75") and a wingspan of 1830mm (72 inch ), it's the largest EDF produced by Freewing to date. This model uses EPO foam with integrated aluminum carbon to strengthen the airframe while limiting the weight of the model to the greatest possible extent. Except for the foam fuselage, all the other components require only screws to complete an easy assembly.
A control board with ribbon wire is used to simplify the wires between the main wing and the fuselage for easy assembly and disassembly for transport. The built-in wiring channel of the main wing is easy to use and retains the overall scale appearance of this gorgeous airliner. Add to it 11 pre-installed LED lights throughout the aircraft and you will love taking leisure flights at dawn and dusk with this AL37 airliner.
The Freewing AL37 Airliner uses two 3048-2150KV brushless outrunners housed in 70mm EDF casing with 12-blade fans. Those are powered by two 60A brushless ESC and need just one 6S LiPo to limit weight and allow this airliner to cruise comfortably at less than half throttle. In the case of a 6S 5000mAh battery, the maximum flight time can stretch to potentially 10 minutes with the proper throttle usage.
The front and rear landing gears are made of aluminum alloy and have shock absorption function and will make scale landings on the mains an enjoyable experience with each and every flight. Also, the larger size of the wheels (Nose wheel diameter: 45mm, Main wheel diameter: 70mm) make take-offs and landings a breeze in most grassland environments. This model has a beautiful air posture, and good stability in high and low speed. It is very suitable for an immersive flight like FPV and is an excellent leisurely flyer that every EDF jet pilot can enjoy.
FEATURES:
- Beautiful, scale outline both static and in the skies,it is made in china Freewing Model
- Giant scale, yet lightweight with docile flying characteristics
- Attractive, Freewing -centric white decals
- 11 LED light system throughout the airframe
- 4 screw wing assembly makes for easier transport
- Removable winglets with MWS slotting system
- Scale aluminum suspension struts
- Nacelles easily removed with 3 screws
- Scale flap system
x
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]