The scale seat belt Noah is not only a highlight in terms of appearance, you will also experience your overall system anew.
Since the motor is installed close to the centre of gravity, only very low moments of inertia around all axes are created. The result is a very quiet flight, so that you can fly extremely quietly and accurately. Thanks to an integrated ballast system, the optimum wing load of the respective glider flown and, depending on the weather, can be quickly changed. The flight system is delivered completely assembled of course "made in Germany". This means: GRP inlay, motor, conversion motor with long motor shaft, bearing remote shaft, motor controller, ballast system, XT60E1 plug, foam drawer for the batteries and the folding propeller are already pre-assembled. Two Hacker 2400mAh batteries are used, which are connected in parallel, resulting in 4800mAh. The optimal design of the entire drive train, the resulting low currents and a high aerodynamic efficiency of the propeller ensure long flight times. The batteries are plugged into permanently installed XT60E1 plugs, which are screwed to the GRP inlay. This makes it easier to connect the batteries and can be done with one hand.
The following components are already included at delivery and ready assembled:- GRP inlay
- Engine chipper A40 10S V4 (internal)
- Long motor shaft
- Ball-bearing remote shaft
- YGE controller 65 LVT
- Ballast system
- Battery protection holder made of special foam
- Folding propeller manipulator
- GRP spacers for folding propeller
- Special folding propeller
- 2 XT60E1 plug (screwed into the GRP inlay)
- Ballast system
- CFRP cooling air inlet plate
- CFRP cooling air outlet ring
