It has a total length of 50mm, in the fuselage there are 34mm, 16mm look out of the fuselage. In the fuselage the diameter is 14mm. The clutch weighs only 11g. The coupling is designed in such a way that it can be operated with the enclosed pin as well as with a Bowden cable. For this purpose there is a bearing at the lower end of the coupling in which a 3mm Bowden cable sleeve can be glued. This offer includes a 5mm birch plywood mounting plate for the coupling. The plate has a 40x20mm cut-out for a standard servo. The trigger pin is adjusted so that the length does not have to be changed. The top side of the plate can be adjusted exactly to the shape of the fuselage spine. The entire plate can be easily glued or screwed to an auxiliary frame. The panel measures 75mm in width and 95mm in height. This way you get a product that can be quickly retrofitted in your model.
Tow release made of high-strength aluminium for direct attachment to the reinforced fuselage backs. Tensile tests have shown that it can be loaded up to 100kp without any problems. The clutch has two release functions. For example, for show models with the first function a parachute can be dropped and with the second one a banner can be dropped. Outside of the fuselage, the clutch is milled out very nicely, so that ropes and key rings can be hung in without any problems. The release pin consists of 2mm spring steel 100mm long and M2 thread for screwing on a standard ball head.
