- 1 Stream-Fan 100mm kv1070 ducted fan system (consisting of a Hacker Motor E50-L 1,5 kv1070 inrunner and WeMoTec ducted fan) and 1 manual.
Powerful ducted fan drive suitable e. g. for sport and scale R/C models with 10S or 12S LiPo battery up to approx. 8 kilograms take-off weight.
Driven by our Hacker Motor E50-L 1,5 kv1070 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Driven by our Hacker Motor E50-L 1,5 kv1070 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]
HACKER STREAM-FAN 100MM KV1070 IMPELLER-SYSTEM
Product number:
9777679
Manufacturer number:
10107405
€315.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Additionally selected items:
- 1 Stream-Fan 100mm kv1070 ducted fan system (consisting of a Hacker Motor E50-L 1,5 kv1070 inrunner and WeMoTec ducted fan) and 1 manual.
Powerful ducted fan drive suitable e. g. for sport and scale R/C models with 10S or 12S LiPo battery up to approx. 8 kilograms take-off weight.
Driven by our Hacker Motor E50-L 1,5 kv1070 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Driven by our Hacker Motor E50-L 1,5 kv1070 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]