High-quality brushless motor BLDC (external rotor) for model aircraft. The BOOST motor series is the result of over 15 years of experience in the field of modern electric drives.
Features:- Highest manufacturing quality
- Perfect ventilation through open housing design
- Use of the best materials
- High temperature resistant neodymium magnets
- Extra large quality ball bearings
- Long shaft 180mm available as an optional extra
Range of use - model/take-off weight:- 3D aerobatic models up to approx. 4500g
- Aerobatic models up to approx. 5000g
- Trainer up to approx. 5500g
- Gliders up to approx. 6000g
Optional accessories (not included in delivery):Motor shaft Long Boost 90 / Ø=6mm / L=180mm, # 4956
Specifications:- Dimensions: Ø = 50mm / L = 60mm
- Weight: 455g
- Shaft diameter: 6.0mm / internal thread M3
- LiPo battery / cell count: 6 - 8 cells
- Idle speed per volt: 280 rpm-1 (KV)
- Max. Load 20sec: 65A
- Brushless controller (recommended): PICHLER XQ-120HV, # C6835
- Propeller (recommended): Fiala 20x8, # C6084 @ 6S LiPo (22,2V) / Fiala 18x8, # C6041 @ 8S LiPo (29,6V)
- LiPo battery (recommended): LEMONRC or RED POWER
Note: Of course, other propellers (e.g. 3-blade or smaller sizes) than specified here can also be used. Likewise, batteries with a different, e.g. higher, capacity can also be used. Please make sure that the permissible currents (A) are not exceeded. For simple current measurement we recommend our proven POWER WATTS 150, # C7282. A device that is always needed and should not be missing in any equipment.
