The ARTF kit contents: Oracover® covered fuselage, wing and tailplane, painted fibreglass cowl, carbon undercarriage, tail wheel assembly, wheels, set of accessories and instruction manual.
Wing-span (mm): | 1854 |
---|---|
Flight weight approx. (g): | 4989 |
Control: | H,S,Q,M |
Length (mm): | 1778 |
Manufacturer: | AJ |
Fuselage: | Wood |
Wings: | Wood |
Rec. engine: | 30-40ccm/BL 8-12S 2400W |
Version: | ARF - ALMOST READY TO FLY |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Electric & Combustion |
A semi scale model of the American aerobatic aeroplane for 30-40ccm petrol engine or 2.5-3.5 kW brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator halves are controlled by 2 servos installed in the tail part of the fuselage. The rudder could be controlled either by a servo installed in the cockpit with a closed-loop linkage, or by a servo installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need a reliable 30-40 ccm petrol engine or at least 2.5 kW brushless electric motor, at least 100 A ESC and 40C 4,000-5,000 mAh 8S LiPo pack.
You will need at least 6-channel RC set to control your Laser Z230 - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4-5 fast and strong standard size digital servos, like Hitec HS-7955TG, D954SW.
Das Produkt Laser 230z ARF 73" Rot 1,85m von AJ AIRCRAFT in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1854 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator halves are controlled by 2 servos installed in the tail part of the fuselage. The rudder could be controlled either by a servo installed in the cockpit with a closed-loop linkage, or by a servo installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need a reliable 30-40 ccm petrol engine or at least 2.5 kW brushless electric motor, at least 100 A ESC and 40C 4,000-5,000 mAh 8S LiPo pack.
You will need at least 6-channel RC set to control your Laser Z230 - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4-5 fast and strong standard size digital servos, like Hitec HS-7955TG, D954SW.
Das Produkt Laser 230z ARF 73" Rot 1,85m von AJ AIRCRAFT in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1854 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
KAVAN Europe s.r.o.
Doubravice 110
53353 PARDUBICE
TSCHECHISCHE REPUBLIK
Tel: +420466260133
[email protected]
AJ AIRCRAFT Laser 230z ARF 73” Red 1.85m Aerobatic model
Product number:
9800558
Manufacturer number:
AJ0005R
€659.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Additionally selected items:
The ARTF kit contents: Oracover® covered fuselage, wing and tailplane, painted fibreglass cowl, carbon undercarriage, tail wheel assembly, wheels, set of accessories and instruction manual.
Wing-span (mm): | 1854 |
---|---|
Flight weight approx. (g): | 4989 |
Control: | H,S,Q,M |
Length (mm): | 1778 |
Manufacturer: | AJ |
Fuselage: | Wood |
Wings: | Wood |
Rec. engine: | 30-40ccm/BL 8-12S 2400W |
Version: | ARF - ALMOST READY TO FLY |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Electric & Combustion |
A semi scale model of the American aerobatic aeroplane for 30-40ccm petrol engine or 2.5-3.5 kW brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator halves are controlled by 2 servos installed in the tail part of the fuselage. The rudder could be controlled either by a servo installed in the cockpit with a closed-loop linkage, or by a servo installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need a reliable 30-40 ccm petrol engine or at least 2.5 kW brushless electric motor, at least 100 A ESC and 40C 4,000-5,000 mAh 8S LiPo pack.
You will need at least 6-channel RC set to control your Laser Z230 - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4-5 fast and strong standard size digital servos, like Hitec HS-7955TG, D954SW.
Das Produkt Laser 230z ARF 73" Rot 1,85m von AJ AIRCRAFT in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1854 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator halves are controlled by 2 servos installed in the tail part of the fuselage. The rudder could be controlled either by a servo installed in the cockpit with a closed-loop linkage, or by a servo installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need a reliable 30-40 ccm petrol engine or at least 2.5 kW brushless electric motor, at least 100 A ESC and 40C 4,000-5,000 mAh 8S LiPo pack.
You will need at least 6-channel RC set to control your Laser Z230 - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4-5 fast and strong standard size digital servos, like Hitec HS-7955TG, D954SW.
Das Produkt Laser 230z ARF 73" Rot 1,85m von AJ AIRCRAFT in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1854 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
KAVAN Europe s.r.o.
Doubravice 110
53353 PARDUBICE
TSCHECHISCHE REPUBLIK
Tel: +420466260133
[email protected]