AJ AIRCRAFT Slick 540 61” ARF red aerobatic model
Product number:
9800405
Manufacturer number:
AJ0007R
€469.99*
No new delivery date is known. Please register for the stock notification below. As soon as we receive new information, you will be notified.
- Slick 540 61" ARF red acrobatic model
- fuselage with foil cover
- wing and tail
- engine cover made of spray laminate
- accessory set
- carbon chassis
- spur, wheels
- instructions
| Wing-span (mm): | 1550 |
|---|---|
| Flight weight approx. (g): | 2680-2750 |
| Control: | Höhenruder, Motorsteuerung, Querruder, Seitenruder |
| Length (mm): | 1430 |
| Manufacturer: | AJ |
| Fuselage: | Wood/Carbon Kevlar |
| Wings: | Rippenb./Vollbeplankt |
| Rec. engine: | BL Outrunner 1400-1600 W |
| Rec. Battery: | 4-6S/1800-2800mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
A semi scale model of the South African aerobatic aeroplane for 1,400-1,600 W brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need 1,200-1,1600 W brushless electric motor , 80-100 A ESC and 40C 3,300-4,000 mAh 6S LiPo pack.
You will need at least 4-channel RC set to control your Slick 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4 fast and strong digital mini servos.
AJ Aircraft-preeminent models from the top-pilot Andrew Jesky!AJ Aircraft offers aerodynamic model-aircrafts to demanding aerobatics-pilots. The experience of the several-time winner of F3A National USA is reflected in the models.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need 1,200-1,1600 W brushless electric motor , 80-100 A ESC and 40C 3,300-4,000 mAh 6S LiPo pack.
You will need at least 4-channel RC set to control your Slick 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4 fast and strong digital mini servos.
AJ Aircraft-preeminent models from the top-pilot Andrew Jesky!AJ Aircraft offers aerodynamic model-aircrafts to demanding aerobatics-pilots. The experience of the several-time winner of F3A National USA is reflected in the models.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
KAVAN Europe s.r.o.
Doubravice 110
53353 PARDUBICE
TSCHECHISCHE REPUBLIK
Tel: +420466260133
[email protected]