A semi scale model of the South African aerobatic aeroplane for 30-40ccm petrol engine or 2.4-3.5 kW brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator halves are controlled by 2 servos installed in the tail part of the fuselage. The rudder could be controlled either by a servo installed in the cockpit with a closed-loop linkage, or by a servo installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need a reliable 30-40 ccm petrol engine or at least 2.4 kW brushless electric motor, at least 100 A ESC and 40C 3,300-4,500 mAh 8-12S LiPo pack.
You will need at least 6-channel RC set to control your Slick 540 - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4-5 fast and strong standard size digital servos, like Hitec HS-7955TG, D954SW.
Das Produkt Slick 74" 540 ARF Kunstflugmodell von AJ AIRCRAFT in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1880 sowie ein Gewicht von 5000. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8-12S/3300-4500mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
AJ Aircraft-preeminent models from the top-pilot Andrew Jesky!AJ Aircraft offers aerodynamic model-aircrafts to demanding aerobatics-pilots. The experience of the several-time winner of F3A National USA is reflected in the models.
