EXTREMEFLIGHT-RC PEREGRINE Doppeldecker 70cc Rot/Weiss ARF
Product number:
9801694
Manufacturer number:
A451-R/W
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 200G PER 100G RESIN+HARDENER
Content: 0.2 kg (€96.00* / 1 kg)
€19.20*
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
- PEREGRINE Doppeldecker 70cc ARF
| Wing-span (mm): | 1940 |
|---|---|
| Control: | H,S,Q,M |
| Length (mm): | 2175 |
| Manufacturer: | Extreme Flight RC |
| Fuselage: | Wood |
| Wings: | Wood |
| Rec. engine: | Scorpion A-6528-200kv / 60-70cc |
| Rec. Battery: | 12S/5000-5500mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric & Combustion |
The Extreme Flight 70CC Peregrine is the big brother of our popular electric 53” Peregrine biplane. The goal of the Peregrine project was to produce a sharp-looking, fully-aerobatic biplane that is instantly comfortable for monoplane pilots. With our quick-latching wings and tail, setup at the field is remarkably fast and easy.
Powered with either a DA-70 or GP-76cc twin cylinder gas engine, the Peregrine is happy in sport/precision, 3D, or XA flying modes. If you want to go 12S electric power, the Peregrine has an integrated battery hatch for easy access.
The Peregrine is a very complete kit including: pilot figure, cockpit floor and dashboard, standard foil wing bags, carbon fiber landing gear and tailwheel, carbon wing and stab tubes, and all competition-grade hardware (including Du-Bro ball links.) You’ll save time during assembly with factory pre-hinged and gap-sealed control surfaces, pre-installed control horns and genuine Ultracote covering. We go the extra mile with gas cooling baffles, a two-piece cowl, a clear template for cutting exhaust holes, all-quick-latching wings, struts, canopy and battery hatch and more!
The Peregrine features a unique flow-through cowl system with pre-fabricated fiberglass in-and-out cooling ducts to force cooling air directly over the cylinder heads of your engine. If you are using electric power, you can lightly modify the gas cooling ducts for your electric system, or you can use these 3D printing files to create custom-fit electric cooling ducts
Models from "Extremeflight-RC" are known for outstanding quality and excellent performance. The models are mainly made in classic wooden construction and are delivered with the most important as well as very high quality accessories (many models mostly without decoration set though). Countless pilots all over the world trust in Extremeflight models. An extensive, illustrated building instruction in English language (partly as download) is only available for older models. For newer models there is a video instruction which allows a quick final assembly. We keep you informed about news on www.lindinger.at and you will find detailed product descriptions as well as many detailed photos and videos.
Models of Extremeflight-RC are known for excellent quality and performance. Most models are made out of wood and are shipped with the most important and very valuable accessoires (many models without decal set). Numerous pilots all over the world trust in Extremeflight models.
Powered with either a DA-70 or GP-76cc twin cylinder gas engine, the Peregrine is happy in sport/precision, 3D, or XA flying modes. If you want to go 12S electric power, the Peregrine has an integrated battery hatch for easy access.
The Peregrine is a very complete kit including: pilot figure, cockpit floor and dashboard, standard foil wing bags, carbon fiber landing gear and tailwheel, carbon wing and stab tubes, and all competition-grade hardware (including Du-Bro ball links.) You’ll save time during assembly with factory pre-hinged and gap-sealed control surfaces, pre-installed control horns and genuine Ultracote covering. We go the extra mile with gas cooling baffles, a two-piece cowl, a clear template for cutting exhaust holes, all-quick-latching wings, struts, canopy and battery hatch and more!
The Peregrine features a unique flow-through cowl system with pre-fabricated fiberglass in-and-out cooling ducts to force cooling air directly over the cylinder heads of your engine. If you are using electric power, you can lightly modify the gas cooling ducts for your electric system, or you can use these 3D printing files to create custom-fit electric cooling ducts
Models from "Extremeflight-RC" are known for outstanding quality and excellent performance. The models are mainly made in classic wooden construction and are delivered with the most important as well as very high quality accessories (many models mostly without decoration set though). Countless pilots all over the world trust in Extremeflight models. An extensive, illustrated building instruction in English language (partly as download) is only available for older models. For newer models there is a video instruction which allows a quick final assembly. We keep you informed about news on www.lindinger.at and you will find detailed product descriptions as well as many detailed photos and videos.
Models of Extremeflight-RC are known for excellent quality and performance. Most models are made out of wood and are shipped with the most important and very valuable accessoires (many models without decal set). Numerous pilots all over the world trust in Extremeflight models.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]