EXTREMEFLIGHT-RC
EXTREMEFLIGHT-RC Slick 580 70" V2 Plus Yellow/Red/Grey
Product number:
9795529
Manufacturer number:
A366V2-Y/R
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 200G PER 100G RESIN+HARDENER
Content: 0.2 kg (€96.00* / 1 kg)
€19.20*
- ARF model in wooden construction
- ready covered
- Small parts
- Assembly instructions in English
| Wing-span (mm): | 1778 |
|---|---|
| Flight weight approx. (g): | 4989 |
| Control: | H,S,Q,M |
| Length (mm): | 1805 |
| Manufacturer: | Extremeflight-RC |
| Fuselage: | Wood |
| Wings: | Wood/rib construction |
| Rec. engine: | DA 35 / Xpwr 32cc |
| Rec. Battery: | 6S/3000-3700mAh LiXX (12S) |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric & Combustion |
70" Slick 580 EXP V2
Using design and construction technology from the 120cc Slick 580 EXP, the V2 70" features a new generation of light, strong EXP construction. We've radically expanded the use of composites, drawing on our experience from 120c, which has allowed us to create a highly styled appearance along with very light weight.
For gasoline power, we recommend the DA-35 or GP38 engine, and we have pre-marked the firewall for these engines. For other engines in the size the firewall also has "crosshair" markings to align these various templates. If installing the DA-35, the standoffs included with the engine are the correct length. A 14 or 17oz. Extreme Flight Flowmaster fuel tank is recommended.
For electric power, we recommend the XPWR 32CC brushless outrunner motor paired an 80-120 amp HV ESC, providing approximately 3000-3200 watts. Our choice is the Castle Creations Edge 80 HV so the 70" Slick 580 airframe is equipped with a custom mounting location specifically for the Edge controllers. With the XPWR 32cc, we recommend 12S 3000-3700mah lipo batteries with a 20x8 or 20x10 electric prop.
Use the Extreme Flight BlazingStar STANDARD EXTRA-LONG adjustable standoff kit to perfectly mount the XPWR 32cc motor into this airframe or anywhere sized for a DA-35 installation. The firewall of the V2 70" Slick 580 EXP is also pre-marked for the XPWR 32cc bolt pattern to add convenience.
The V2 Slick 580 EXP requires 4 full-size metal-gear servos, 300 oz-inches or more recommended. If using gas power, add an additional servo for throttle control, which does not need to be high torque, although high speed is beneficial.
The spinner size is 3.5 inches diameter. Note that the XPWR 32cc requires a perimeter-bolt style spinner or a center-bolt adaptor.
The V2 70" Slick 580 borrows tech from the 120CC Slick, and has been further targeted to maximize 3D stability. This is a rock-solid low-and-slow 3D platform that could easily be a 3D trainer, while retaining the abilities of its competition-winning big brother. It has very low coupling, no rock, and excellent manners, while snapping and spinning precisely and sharply.
Models from "Extremeflight-RC" are known for outstanding quality and excellent performance. The models are mainly made in classic wooden construction and are delivered with the most important as well as very high quality accessories (many models mostly without decoration set though). Countless pilots all over the world trust in Extremeflight models. An extensive, illustrated building instruction in English language (partly as download) is only available for older models. For newer models there is a video instruction which allows a quick final assembly. We keep you informed about news on www.lindinger.at and you will find detailed product descriptions as well as many detailed photos and videos.
Das Produkt SLICK 580 70" V2 Plus Gelb/Rot/Grau von EXTREMEFLIGHT-RC in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1778 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 6S/3000-3700mAh LiXX (12S) Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
Using design and construction technology from the 120cc Slick 580 EXP, the V2 70" features a new generation of light, strong EXP construction. We've radically expanded the use of composites, drawing on our experience from 120c, which has allowed us to create a highly styled appearance along with very light weight.
For gasoline power, we recommend the DA-35 or GP38 engine, and we have pre-marked the firewall for these engines. For other engines in the size the firewall also has "crosshair" markings to align these various templates. If installing the DA-35, the standoffs included with the engine are the correct length. A 14 or 17oz. Extreme Flight Flowmaster fuel tank is recommended.
For electric power, we recommend the XPWR 32CC brushless outrunner motor paired an 80-120 amp HV ESC, providing approximately 3000-3200 watts. Our choice is the Castle Creations Edge 80 HV so the 70" Slick 580 airframe is equipped with a custom mounting location specifically for the Edge controllers. With the XPWR 32cc, we recommend 12S 3000-3700mah lipo batteries with a 20x8 or 20x10 electric prop.
Use the Extreme Flight BlazingStar STANDARD EXTRA-LONG adjustable standoff kit to perfectly mount the XPWR 32cc motor into this airframe or anywhere sized for a DA-35 installation. The firewall of the V2 70" Slick 580 EXP is also pre-marked for the XPWR 32cc bolt pattern to add convenience.
The V2 Slick 580 EXP requires 4 full-size metal-gear servos, 300 oz-inches or more recommended. If using gas power, add an additional servo for throttle control, which does not need to be high torque, although high speed is beneficial.
The spinner size is 3.5 inches diameter. Note that the XPWR 32cc requires a perimeter-bolt style spinner or a center-bolt adaptor.
The V2 70" Slick 580 borrows tech from the 120CC Slick, and has been further targeted to maximize 3D stability. This is a rock-solid low-and-slow 3D platform that could easily be a 3D trainer, while retaining the abilities of its competition-winning big brother. It has very low coupling, no rock, and excellent manners, while snapping and spinning precisely and sharply.
Models from "Extremeflight-RC" are known for outstanding quality and excellent performance. The models are mainly made in classic wooden construction and are delivered with the most important as well as very high quality accessories (many models mostly without decoration set though). Countless pilots all over the world trust in Extremeflight models. An extensive, illustrated building instruction in English language (partly as download) is only available for older models. For newer models there is a video instruction which allows a quick final assembly. We keep you informed about news on www.lindinger.at and you will find detailed product descriptions as well as many detailed photos and videos.
Das Produkt SLICK 580 70" V2 Plus Gelb/Rot/Grau von EXTREMEFLIGHT-RC in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1778 sowie ein Gewicht von 4989. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 6S/3000-3700mAh LiXX (12S) Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar