OMP
OMP Edge 540 60" ARF - Gelb 1,52m
Product number:
9799048
Manufacturer number:
OMPP004Y
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 200G PER 100G RESIN+HARDENER
Content: 0.2 kg (€96.00* / 1 kg)
€19.20*
- ARF finished model made of wooden construction
- Oracover® covered fuselage, wing and tailplane
- painted fibreglass cowl
- carbon undercarriage
- tail wheel assembly, wheels
- set of accessories
- Assembly instructions in English
| Wing-span (mm): | 1524 |
|---|---|
| Flight weight approx. (g): | 2750-2850 |
| Control: | H,S,Q,M |
| Length (mm): | 1500 |
| Manufacturer: | OMP |
| Fuselage: | Wood |
| Wings: | Wood/rib construction |
| Rec. engine: | BL 1200-1600 W |
| Rec. Battery: | 6S/3300-4000mAh Lixx |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
A semi scale model of the American aerobatic aeroplane for 1,200-1,600 W brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need 1,200-1,1600 W brushless electric motor (e.g. KAVAN PRO 5050-515), 80-100 A ESC and 40C 3,300-4,000 mAh 6S LiPo pack.
You will need at least 4-channel RC set to control your Edge 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4 fast and strong digital mini servos, like KAVAN GO-1035MG.
Specifications:
Das Produkt Edge 540 60" ARF - Gelb 1,52m von OMP in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1524 sowie ein Gewicht von 2750-2850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 6S/3300-4000mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need 1,200-1,1600 W brushless electric motor (e.g. KAVAN PRO 5050-515), 80-100 A ESC and 40C 3,300-4,000 mAh 6S LiPo pack.
You will need at least 4-channel RC set to control your Edge 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4 fast and strong digital mini servos, like KAVAN GO-1035MG.
Specifications:
- Wing surface [dm2] 42.3
- Weight [g] 2750 - 2850
- Controlled functions S,V,K(2),M
- Build difficulty S1
- Operating difficulty P3,P4
Das Produkt Edge 540 60" ARF - Gelb 1,52m von OMP in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1524 sowie ein Gewicht von 2750-2850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 6S/3300-4000mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar