Skip to main content

FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

“ EPP foam parts
“ Landing gear
“ Accessories
“ Carbon linkages

Wing-span (mm): 1070
Flight weight approx. (g): 550
Control: H,S,Q,M
Length (mm): 1120
Manufacturer: RC-Factory
Fuselage: EPP
Wings: EPP
Rec. engine: BL Outrunner
Rec. Battery: 3S/1600mAh LiXX
Version: KIT
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

From the Twisted mind of Cody Wojcik comes the Veloxity! Loosely based on the full-scale Velox Revolution 1, the Veloxity delivers an experience never before available in a foam plane. As one of the stiffest foam airframes around, precision tracking, a fast roll rate, wild tumbles, knife edge spins, and other maneuvers normally reserved for wood airplanes are all within the Veloxity's repertoire. With its consistent roll rate and arrow-straight tracking, the Veloxity may be the best rifle roll trainer out there! Of course, pull back on the throttle and the Veloxity will 3D with the best of them. A custom airfoil and carefully chosen moments means that smooth harriers upright, inverted, and rolling are stable and predictable, but not sloppy or imprecise...the Veloxity maintains precision through its whole flight envelope.

Building the Veloxity is a snap. RCFactory's precision foam machining and laser cut wood, carbon, and fiberglass parts bond in quickly and easily into pre-cut slots and grooves. In many ways the Veloxity builds as easily as a 32" flat plane, and a couple of easy sessions is all you'll need to get it together and ready to rip. Controls are actuated with precision ball links that go together easily and pop off in a hard crash, saving servos.
Aspiring pilots need not fear the Veloxity! With reduced throws and the throttle pulled back a bit, it's an easy airplane to fly and is extremely predictable. It's a perfect step between 32" flat foamies and your first balsa bird. The super strong airframe means that less than perfect landings and the occasional dirt nap will not keep you grounded!


RC-Factory model aircraft are supplied without assembly instructions! However, these are available for download in the respective item detail view.

Das Produkt Veloxity Red EXPERT series von RC-Factory in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1070 sowie ein Gewicht von 550. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1600mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

RC-Factory
RC-Factory Veloxity Red EXPERT series
Product number: 9789954
Manufacturer number: T93R

€119.99*

% €139.50* (13.99% saved)

In stock. Usually ships within 1 business day.

“ EPP foam parts
“ Landing gear
“ Accessories
“ Carbon linkages

Wing-span (mm): 1070
Flight weight approx. (g): 550
Control: H,S,Q,M
Length (mm): 1120
Manufacturer: RC-Factory
Fuselage: EPP
Wings: EPP
Rec. engine: BL Outrunner
Rec. Battery: 3S/1600mAh LiXX
Version: KIT
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

From the Twisted mind of Cody Wojcik comes the Veloxity! Loosely based on the full-scale Velox Revolution 1, the Veloxity delivers an experience never before available in a foam plane. As one of the stiffest foam airframes around, precision tracking, a fast roll rate, wild tumbles, knife edge spins, and other maneuvers normally reserved for wood airplanes are all within the Veloxity's repertoire. With its consistent roll rate and arrow-straight tracking, the Veloxity may be the best rifle roll trainer out there! Of course, pull back on the throttle and the Veloxity will 3D with the best of them. A custom airfoil and carefully chosen moments means that smooth harriers upright, inverted, and rolling are stable and predictable, but not sloppy or imprecise...the Veloxity maintains precision through its whole flight envelope.

Building the Veloxity is a snap. RCFactory's precision foam machining and laser cut wood, carbon, and fiberglass parts bond in quickly and easily into pre-cut slots and grooves. In many ways the Veloxity builds as easily as a 32" flat plane, and a couple of easy sessions is all you'll need to get it together and ready to rip. Controls are actuated with precision ball links that go together easily and pop off in a hard crash, saving servos.
Aspiring pilots need not fear the Veloxity! With reduced throws and the throttle pulled back a bit, it's an easy airplane to fly and is extremely predictable. It's a perfect step between 32" flat foamies and your first balsa bird. The super strong airframe means that less than perfect landings and the occasional dirt nap will not keep you grounded!


RC-Factory model aircraft are supplied without assembly instructions! However, these are available for download in the respective item detail view.

Das Produkt Veloxity Red EXPERT series von RC-Factory in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1070 sowie ein Gewicht von 550. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als KIT ausgeführt . Wir empfehlen einen 3S/1600mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar