- ARF model in wooden/carbon construction
- ready covered
- Carbon Fiber Spinner
- Fuel Dot
- Fuel Vent
- Titanium Pushrods
- Aluminum Engine Standoffs for DA 120
- Aluminum Servo Arms (25T spline):
- (4) x 1.5/1.25" single arms for ailerons
- (2) x 2/1.75" single arms for elevators
- (2) x 2/1.75" single arms for rudder (only needed for push/pull setup)
- Small parts
- Assembly instructions in English (only available as download)
Wing-span (mm): | 2600 |
---|---|
Flight weight approx. (g): | 12900 |
Control: | H,S,Q,M |
Length (mm): | 2520 |
Manufacturer: | RC-Gadgetz |
Fuselage: | Wood |
Wings: | Wood/rib construction |
Rec. engine: | 100-130ccm |
Version: | ARF - ALMOST READY TO FLY |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Combustion |
Please note that due to the size of this article no postal dispatch is possible. An order can only be placed by forwarding agent (unfreight forwarded) or collection.
- Carbon Fiber Laminated Plywood Throughout the Fuselage.
- Plug-in Wings with Carbon Reinforcements
- EZ Quick Release for Wings, Stabs, and Canopy
- High-quality Instrument Panel
- Genuine Oracover
- Canister and Pipe Tunnel
- Carbon Fiber Wing and Stab Tubes
- Carbon Fiber Landing Gear
- Pre-hinged Surfaces
- Pre-sealed Hinge Gaps
- Rubber Grommet for Fuel Tubing
- Removable Rudder
- All Servo Mounting Holes are Pre-drilled
- Two Piece Fiberglass Cowl
- Fiber Glass Wheel Pants
- Carbon Fiber Wing and Stab Tube
- Included MPX Connectors
- High-Quality Carbon / Aluminum Tailwheel Assembly
- Pre-installed Servo Extensions
- Included Aluminum Servo Arms
What's new on the 120cc Extra 330 LX V2:
- Re-engineered internal structure, using real carbon laminated ply, providing
- added rigidity to the airframe while at the same time significantly reducing the weight.
- Strategic reinforcement to areas prone to fatigue or repeated high stress.Eexamples are servo mounts, tail section, and landing gear area to name a few.
- Airframe comes out of the box with the surfaces hinged and sealed, servo wires routed, rubber grommets installed, tank plumbed and many more.
- The fuel tank is plumbed and ready to be used.
- All servo mounts for the surfaces have the servo mounting pilot holes drilled.
- The rudder is now removable, which allows even the 120cc to fit in much smaller vehicles.
- The addition of a simple innovative spring based quick lock/release system for the wings, elevators, and canopy, that provide super-fast on-field assembly and disassembly time.
- New carbon/aluminum tail wheel design to allow for the rudder removal and adds bling to the overall look of the airframe.
- A very realistic scale looking instrument panel and pilot bust to match.
- Kit includes high quality 25T aluminum servo arms for all control surfaces
- High quality, heavy duty servo extensions, routed throughout the airframe. Wires are routed from the tail to the PDB, and the necessary wing extensions are made to the correct length making electronics installation a breeze.
Picture shows the model with decoration set which is not included in the standard delivery and is not available separately!
Manual will be availabel soon as download!
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]
RC-GADGETZ PAU Extra 330LX 120cc original scheme in Orange
Product number:
9796270
Manufacturer number:
PAU-EX-330LX-120cc-orig.Orange
€1,699.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
Additionally selected items:
- ARF model in wooden/carbon construction
- ready covered
- Carbon Fiber Spinner
- Fuel Dot
- Fuel Vent
- Titanium Pushrods
- Aluminum Engine Standoffs for DA 120
- Aluminum Servo Arms (25T spline):
- (4) x 1.5/1.25" single arms for ailerons
- (2) x 2/1.75" single arms for elevators
- (2) x 2/1.75" single arms for rudder (only needed for push/pull setup)
- Small parts
- Assembly instructions in English (only available as download)
Wing-span (mm): | 2600 |
---|---|
Flight weight approx. (g): | 12900 |
Control: | H,S,Q,M |
Length (mm): | 2520 |
Manufacturer: | RC-Gadgetz |
Fuselage: | Wood |
Wings: | Wood/rib construction |
Rec. engine: | 100-130ccm |
Version: | ARF - ALMOST READY TO FLY |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Combustion |
Features:
What's new on the 120cc Extra 330 LX V2:
Picture shows the model with decoration set which is not included in the standard delivery and is not available separately!
Manual will be availabel soon as download!
- Carbon Fiber Laminated Plywood Throughout the Fuselage.
- Plug-in Wings with Carbon Reinforcements
- EZ Quick Release for Wings, Stabs, and Canopy
- High-quality Instrument Panel
- Genuine Oracover
- Canister and Pipe Tunnel
- Carbon Fiber Wing and Stab Tubes
- Carbon Fiber Landing Gear
- Pre-hinged Surfaces
- Pre-sealed Hinge Gaps
- Rubber Grommet for Fuel Tubing
- Removable Rudder
- All Servo Mounting Holes are Pre-drilled
- Two Piece Fiberglass Cowl
- Fiber Glass Wheel Pants
- Carbon Fiber Wing and Stab Tube
- Included MPX Connectors
- High-Quality Carbon / Aluminum Tailwheel Assembly
- Pre-installed Servo Extensions
- Included Aluminum Servo Arms
What's new on the 120cc Extra 330 LX V2:
- Re-engineered internal structure, using real carbon laminated ply, providing
- added rigidity to the airframe while at the same time significantly reducing the weight.
- Strategic reinforcement to areas prone to fatigue or repeated high stress.Eexamples are servo mounts, tail section, and landing gear area to name a few.
- Airframe comes out of the box with the surfaces hinged and sealed, servo wires routed, rubber grommets installed, tank plumbed and many more.
- The fuel tank is plumbed and ready to be used.
- All servo mounts for the surfaces have the servo mounting pilot holes drilled.
- The rudder is now removable, which allows even the 120cc to fit in much smaller vehicles.
- The addition of a simple innovative spring based quick lock/release system for the wings, elevators, and canopy, that provide super-fast on-field assembly and disassembly time.
- New carbon/aluminum tail wheel design to allow for the rudder removal and adds bling to the overall look of the airframe.
- A very realistic scale looking instrument panel and pilot bust to match.
- Kit includes high quality 25T aluminum servo arms for all control surfaces
- High quality, heavy duty servo extensions, routed throughout the airframe. Wires are routed from the tail to the PDB, and the necessary wing extensions are made to the correct length making electronics installation a breeze.
Picture shows the model with decoration set which is not included in the standard delivery and is not available separately!
Manual will be availabel soon as download!
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]