Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

  • ARF model in wooden/carbon construction
  • ready covered
  • Carbon Fiber Spinner
  • Fuel Dot
  • Fuel Vent
  • Titanium Pushrods
  • Aluminum Servo Arms (25T spline):
  • (2) x 1.75/1.5" single arms for ailerons
  • (2) x 1.75/1.5" single arms for elevators
  • (1) x 1.75/1.5" single arms for rudder (only needed for push/pull setup)
  • Small parts
  • Assembly instructions in English (only available as download)

Needed to Complete (not included):
  • Engine DA 70cc or similar
  • Propeller: 24x9 / 24x10
  • Ignition Kill: Powerbox Spark Switch
  • Power Distribution: PowerBox Pioneer or similar
  • Servos: (5) x MKS HBL 550, (1) x MKS HV 1250
  • (2) x 2S 5000mAh 20C 7.4V RX LiPo Battery
  • (1) x 2S 2000mAh 20C 7.4V LiPo Battery ignition


Wing-span (mm): 2300
Flight weight approx. (g): 8600-9500
Control: H,S,Q,M
Length (mm): 2180
Manufacturer: RC-Gadgetz
Fuselage: Wood
Wings: Wood/rib construction
Rec. engine: 50-76ccm
Version: ARF - ALMOST READY TO FLY
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Combustion

Features:
  • Carbon Fiber Laminated Plywood Throughout the Fuselage.
  • Plug-in Wings with Carbon Reinforcements
  • EZ Quick Release for Wings, Stabs, and Canopy
  • High-quality Instrument Panel
  • Genuine Oracover
  • Canister and Pipe Tunnel
  • Carbon Fiber Wing and Stab Tubes
  • Carbon Fiber Landing Gear
  • Pre-hinged Surfaces
  • Pre-sealed Hinge Gaps
  • Rubber Grommet for Fuel Tubing
  • Removable Rudder
  • All Servo Mounting Holes are Pre-drilled
  • Fiberglass Cowl
  • Fiberglass Wheel Pants
  • Pre-installed Connectors
  • High-Quality Carbon / Aluminum Tail Assembly
  • Pre-installed Servo Extensions
  • Included Aluminum Servo Arms

What to expect from the 70cc Extra 330LX:
  • Re-engineered internal structure, using real carbon laminated ply, providing added rigidity to the airframe while at the same time significantly reducing the weight.
  • Strategic reinforcement to areas prone to fatigue or repeated high stress,examples are servo mounts, tail section, and landing gear area to name a few.
  • Airframe comes out of the box with the surfaces hinged and sealed, servo wires routed, rubber grommets installed, tank plumbed and many more.
  • The fuel tank is plumbed and ready to be used.
  • All servo mounts for the surfaces have the servo mounting pilot holes drilled.
  • The rudder is now removable, which allows the 70cc to fit in much smaller vehicles.
  • The addition of a simple innovative spring based quick lock/release system for the wings, elevators, and canopy, that provide super-fast on-field assembly and disassembly time.
  • New carbon/aluminum tail wheel design to allow for the rudder removal and adds bling to the overall look of the airframe.
  • A very realistic scale looking instrument panel and pilot bust to match.
  • Kit includes high quality 25T aluminum servo arms for all control surfaces
  • High quality, heavy duty servo extensions, routed throughout the airframe. Wires are routed from the tail to the PDB, and the necessary wing extensions are made to the correct length making electronics installation a breeze


Picture shows the model with decoration set which is not included in the standard delivery and is not available separately!

Manual will be availabel soon as download!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

RC-GADGETZ PAU Extra 330LX 70cc Original Scheme in Red
Product number: 9796272
Manufacturer number: PAU-EX-330LX-70cc-orig.Red

€1,149.99*

In stock. Usually ships within 1 business day.

  • ARF model in wooden/carbon construction
  • ready covered
  • Carbon Fiber Spinner
  • Fuel Dot
  • Fuel Vent
  • Titanium Pushrods
  • Aluminum Servo Arms (25T spline):
  • (2) x 1.75/1.5" single arms for ailerons
  • (2) x 1.75/1.5" single arms for elevators
  • (1) x 1.75/1.5" single arms for rudder (only needed for push/pull setup)
  • Small parts
  • Assembly instructions in English (only available as download)

Needed to Complete (not included):
  • Engine DA 70cc or similar
  • Propeller: 24x9 / 24x10
  • Ignition Kill: Powerbox Spark Switch
  • Power Distribution: PowerBox Pioneer or similar
  • Servos: (5) x MKS HBL 550, (1) x MKS HV 1250
  • (2) x 2S 5000mAh 20C 7.4V RX LiPo Battery
  • (1) x 2S 2000mAh 20C 7.4V LiPo Battery ignition


Wing-span (mm): 2300
Flight weight approx. (g): 8600-9500
Control: H,S,Q,M
Length (mm): 2180
Manufacturer: RC-Gadgetz
Fuselage: Wood
Wings: Wood/rib construction
Rec. engine: 50-76ccm
Version: ARF - ALMOST READY TO FLY
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Combustion

Features:
  • Carbon Fiber Laminated Plywood Throughout the Fuselage.
  • Plug-in Wings with Carbon Reinforcements
  • EZ Quick Release for Wings, Stabs, and Canopy
  • High-quality Instrument Panel
  • Genuine Oracover
  • Canister and Pipe Tunnel
  • Carbon Fiber Wing and Stab Tubes
  • Carbon Fiber Landing Gear
  • Pre-hinged Surfaces
  • Pre-sealed Hinge Gaps
  • Rubber Grommet for Fuel Tubing
  • Removable Rudder
  • All Servo Mounting Holes are Pre-drilled
  • Fiberglass Cowl
  • Fiberglass Wheel Pants
  • Pre-installed Connectors
  • High-Quality Carbon / Aluminum Tail Assembly
  • Pre-installed Servo Extensions
  • Included Aluminum Servo Arms

What to expect from the 70cc Extra 330LX:
  • Re-engineered internal structure, using real carbon laminated ply, providing added rigidity to the airframe while at the same time significantly reducing the weight.
  • Strategic reinforcement to areas prone to fatigue or repeated high stress,examples are servo mounts, tail section, and landing gear area to name a few.
  • Airframe comes out of the box with the surfaces hinged and sealed, servo wires routed, rubber grommets installed, tank plumbed and many more.
  • The fuel tank is plumbed and ready to be used.
  • All servo mounts for the surfaces have the servo mounting pilot holes drilled.
  • The rudder is now removable, which allows the 70cc to fit in much smaller vehicles.
  • The addition of a simple innovative spring based quick lock/release system for the wings, elevators, and canopy, that provide super-fast on-field assembly and disassembly time.
  • New carbon/aluminum tail wheel design to allow for the rudder removal and adds bling to the overall look of the airframe.
  • A very realistic scale looking instrument panel and pilot bust to match.
  • Kit includes high quality 25T aluminum servo arms for all control surfaces
  • High quality, heavy duty servo extensions, routed throughout the airframe. Wires are routed from the tail to the PDB, and the necessary wing extensions are made to the correct length making electronics installation a breeze


Picture shows the model with decoration set which is not included in the standard delivery and is not available separately!

Manual will be availabel soon as download!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]