AERONAUT
AERONAUT SHK KIT WITH WOOD RIBBED WINGS AND GRP FUSELAGE, GLIDER
Product number:
9723229
Manufacturer number:
112501
€499.00*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Kit SHK with GRP fuselage and end cap
a transparent cockpit hood with cabin frame
two-storey airbrakes, wing safety device
Small parts and decal sheets
Wings and tail fins built in ribbed construction
detailed construction instructions
a transparent cockpit hood with cabin frame
two-storey airbrakes, wing safety device
Small parts and decal sheets
Wings and tail fins built in ribbed construction
detailed construction instructions
| Wing-span (mm): | 4000 |
|---|---|
| Empty weight approx. (g): | 4300 |
| Control: | H,S,Q,SK,(EZFW),(SKU) |
| Length (mm): | 1501 |
| Manufacturer: | Aeronaut |
| Fuselage: | GFK |
| Wings: | Wood/rib construction |
| Version: | KIT |
| Airfoil: | Selig S4233 mod. |
| Flight Skill: | Advanced |
| Build Skill: | Professional |
The glider model SHK is a further development of the Standard-Austria, which was designed in 1958 by engineer Rüdiger Kunz. In 1965, Standard Austria was revised by Klaus Holighaus at Schempp-Hirth, Kirchheim (S-H-K) with the collaboration of Klaus Holighaus. The wingspan was increased from 15 to 17 m and the SHK was fitted with a retractable landing gear. The SHK-67, built in 1967, had a drop-off brake parachute in the rear fuselage.
The model for the 1:4.25 scale model was based on the SHK, serial number 27, registration number D-5445, which was temporarily stationed at the glider area Übersberg near Reutlingen, Germany. 4000 mm span was created with the help of plans by Schempp-Hirth.
The GRP fuselage has moulded-in fuselage-wing transitions and a guide for the cabin frame. The rear part is removable - access to the storage and control of the pendulum control unit. The plastic cockpit parts are included in the kit.
The wing mounting consists of a 12 mm Ø round steel rod guided in a brass tube, a wing securing device is included. A modified Selig S 4233 profile was selected as the root profile and modified in two steps over the entire span. In addition, the wing got a geometric limitation. This design guarantees excellent flight behaviour, especially in circles, i. e. in thermal flight.
The flight characteristics of the model are well-balanced, ideal for thermal flying and not too hard wind conditions on the slope. A retractable undercarriage or towing coupling can be fitted at one's own discretion.
The wings and tail units are completely made of wood in ribbed construction. All parts are laser-cut and built step by step with the help of the proven aero-naut-helling. The planking of the ribbed surface is also carried out with high-quality Abachi veneer, which has been precisely lasered and only needs to be glued on cleanly. To improve elasticity, the planking was bonded with a specially developed textile fibre.
The product SHK BAUSATZ MIT HOLZ-RIPPEN TRAGFLÄCHEN from AERONAUT in the category Glider Models has a wingspan of 4000 and a weight of 4300. The model is controlled via the functions H,S,Q,SK,(EZFW),(SKU)*. The Model is Fiberglass .
* Explanation of control functions:
The model for the 1:4.25 scale model was based on the SHK, serial number 27, registration number D-5445, which was temporarily stationed at the glider area Übersberg near Reutlingen, Germany. 4000 mm span was created with the help of plans by Schempp-Hirth.
The GRP fuselage has moulded-in fuselage-wing transitions and a guide for the cabin frame. The rear part is removable - access to the storage and control of the pendulum control unit. The plastic cockpit parts are included in the kit.
The wing mounting consists of a 12 mm Ø round steel rod guided in a brass tube, a wing securing device is included. A modified Selig S 4233 profile was selected as the root profile and modified in two steps over the entire span. In addition, the wing got a geometric limitation. This design guarantees excellent flight behaviour, especially in circles, i. e. in thermal flight.
The flight characteristics of the model are well-balanced, ideal for thermal flying and not too hard wind conditions on the slope. A retractable undercarriage or towing coupling can be fitted at one's own discretion.
The wings and tail units are completely made of wood in ribbed construction. All parts are laser-cut and built step by step with the help of the proven aero-naut-helling. The planking of the ribbed surface is also carried out with high-quality Abachi veneer, which has been precisely lasered and only needs to be glued on cleanly. To improve elasticity, the planking was bonded with a specially developed textile fibre.
The product SHK BAUSATZ MIT HOLZ-RIPPEN TRAGFLÄCHEN from AERONAUT in the category Glider Models has a wingspan of 4000 and a weight of 4300. The model is controlled via the functions H,S,Q,SK,(EZFW),(SKU)*. The Model is Fiberglass .
* Explanation of control functions:
- H ... Elevator
- S ... Rudder
- Q ... Ailerons
- M ... Motor controlled
- V ... Vector controlled
- SK ... Airbrakes
- WK ... Flaps
- WZFW ... Retractable Landing Gear
- SKU ... Glider Tow
- ( ) ... optional - control functions written in brackets are optionally available for the described model