XCELL
XCELL BC-X1000 QUICK CHARGER 1-4 AA & AAA WITH DAMAGED CELL IDENTIFICATION 15 IN 1
Product number:
9713925
Manufacturer number:
137156
Robbe Modellsport RO-SAFETY LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€75.99*
€79.99*(5% saved)
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
| Input Voltage (V): | 100-240 |
|---|---|
| Rechargeable batterie-types: | NiMH/NiCd |
| Rechargeable cell count: | 1-4 Nixx |
| Charge current (A): | 0,2-1 |
| Discharge current (A): | 0,5 A |
| Chargers category: | AC 100-240V |
| Charging current category: | Up to 5A |
| Selection category: | Chargers 230V |
| Discharge current category: | Up to 5A |
Digital LCD quick charger with a variety of functions and a very flat design - ideal for travelling or on the go!
Features:
Technical Data:
Features:
- The microprocessor-controlled quick charger with LCD display can charge 1-4 AA & AAA Ni-MH/Ni-Cd batteries.
- The XCell BC-X1000 charger charges batteries with different charging currents in the steps 200 mA, 500 mA, 700 mA and 1,000 mA.
- The discharge speed can also be set (selectable discharge current: 100/250/350/500 mA).
- A separate LCD display is assigned to each charging slot.
- It is possible to charge AA and AAA batteries simultaneously.
- The batteries are protected against overheating by temperature monitoring.
- The cells are fully detected using the very reliable delta peak method.
- The charger detects defective cells.
- A cyclic process is available, with which the batteries are first discharged and then recharged to prevent the memory effect.
- Old cells can be regenerated by discharging/charging cycles.
- There is a test function for checking the battery capacity.
- Charging or discharging functions can be carried out simultaneously and independently in the different charging bays.
- During a charging or discharging process, the user is shown the most important process data on the respective display. These are the current (mA), the current battery voltage (V), the charged or discharged capacity (mAh or Ah) and the elapsed time (hh:mm).
- The charger is equipped with a charging output for charging smartphones, iPhones or other USB devices (5 V/1 A).
Technical Data:
- Model: Desktop charger
- Control/Functions: Battery defect detection
- Control/Functions: Automatic refresh function
- Control/Functions: Individual shaft monitoring
- Control/Functions: discharge function
- Control/Functions: Rapid capacity test
- Control/Functions: Overcharge protection/maintaining charge.
- Control/Functions: temperature control
- Control/Functions: USB charging function
- Control/Functions: LCD display
- L/W/H: 128 / 75 / 35 mm
- Charging technology: Processor
- charging current: 200/500/700/1000 mA