Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, and the United Kingdom,Ireland!
Clear shrinking dope for covering tissues and fabrics; model hobby fuel (glow fuel and petrol/gasoline) proof. For brush-on, paint roller or spray application.
Use: Stir well before use. Use the KAVAN Thinner Standard as necessary; apply using a soft flat brush (preferred), paint roller or spray gun. Apply 2-5 coats; leave each coat dry at least 24 hours and lightly sand with a fine sandpaper No. 600-1000. When applied to an IC powered model it does not require additional fuel proofing; however, one or two layers of the elastic polyurethane KAV56.9990 KAVAN Top Coat POLY will make the surface of your plane much more scratch and shock resistant.
Removing an excessive uncured dope : A soft cloth or paper towel wetted with KAVAN Thinner STANDARD.
Thinning the dope: The dope is supplied concentrated; you can dilute it with KAVAN Thinner STANDARD in any ratio necessary to achieve the optimal application consistency.
Mixing the dope: The dope could be mixed with KAVAN COLOR line shrinking dopes in any ratio. Considering the different composition we cannot recommend mixing with the KAVAN CLASSIC line dopes and thinners.
Suitable for: Model hobby covering tissues and fabrics (Vlies, etc.), industrial covering fabrics.
Unsuitable for: Materials not resistant to organic solvents (STYROFOAM, etc.).
Model weight increase: 10 ml of the undiluted dope adds about 1.5 g to the weight of your model.
Storage: Keep stored in a tightly sealed container in a cold, dry and dark location (recommended storage temperature range 15°C to 25°C). Do not expose temperature under 5°C; protect from freezing.
Shelf life: Stored under these conditions, a one-year shelf life can be expected.
Status: 1/20242.2 Label elements 1/2024:
Labeling according to Regulation (EC) No. 1272/2008
Classification according to EC Regulation 1272/2008 (CLP)
Signal word Danger
Hazard statements
H225 Highly flammable liquid and vapor
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety instructions
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
EUH066 Repeated exposure may cause skin dryness or cracking.
Additional information:
Density: 0.87 g/cm3, VOC: 722 g/l, Dry matter: 17% vol., VOC limit values ??Cat. B (e): 840 g/l,
Contains: ethyl acetate, acetone, 2-propanol
UFI: 9CNV-303K-A00D-F5U1
