Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

Seamless vacuum tube made of transparent PA/PP/PA multilayer composite film (coextruded polyamide film).

The film has exceptionally good conformability, especially for difficult contours with severe undercuts, thus enabling the molding of complex components. It is self-releasing and can be used in direct contact with resin.

  • Absolutely airtight
  • Self-separating
  • Styrene resistant
  • Diffusion-tight
  • High temperature resistance
  • Can be used with all common resin systems
  • Suitable for vacuum pressing and vacuum infusion

Technical data:

  • Max. Temperature: 180 °C*
  • Thickness: 50 µm
  • Width: 60 cm
  • Elongation at break: approx. 360%

  • Material (3 layers):
  • Outside: 2 self-releasing copolymer layers.
  • Inside: One copolyamide layer
  • Color: Pink

*Maximum use temperature depends on the time period and is process specific. We recommend performing tests before actual use. The tolerance is ± 3 %.

To seal, simply fold and fix the open ends several times. Alternatively, permanently elastic sealing compound (e.g. R&G vacuum sealing tape) is also suitable.

Storage:
Protect from daylight/UV radiation, do not store below 60 % humidity and at room temperature.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

R&G
Faserverbundwerkstoffe GmbH
Im Meißel 7-13
71111 Waldenbuch
DEUTSCHLAND
Tel: +49/7157/53046-0
[email protected]

R&G Vacuum film hose (PA/PP/PA), 600 x 0,050 mm, roll/ 200 m
Product number: 9795578
Manufacturer number: 390160-0650-6

€549.82*

Not in stock. Available only by special order in approx. 7 to 21 business days.

Seamless vacuum tube made of transparent PA/PP/PA multilayer composite film (coextruded polyamide film).

The film has exceptionally good conformability, especially for difficult contours with severe undercuts, thus enabling the molding of complex components. It is self-releasing and can be used in direct contact with resin.

  • Absolutely airtight
  • Self-separating
  • Styrene resistant
  • Diffusion-tight
  • High temperature resistance
  • Can be used with all common resin systems
  • Suitable for vacuum pressing and vacuum infusion

Technical data:

  • Max. Temperature: 180 °C*
  • Thickness: 50 µm
  • Width: 60 cm
  • Elongation at break: approx. 360%

  • Material (3 layers):
  • Outside: 2 self-releasing copolymer layers.
  • Inside: One copolyamide layer
  • Color: Pink

*Maximum use temperature depends on the time period and is process specific. We recommend performing tests before actual use. The tolerance is ± 3 %.

To seal, simply fold and fix the open ends several times. Alternatively, permanently elastic sealing compound (e.g. R&G vacuum sealing tape) is also suitable.

Storage:
Protect from daylight/UV radiation, do not store below 60 % humidity and at room temperature.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

R&G
Faserverbundwerkstoffe GmbH
Im Meißel 7-13
71111 Waldenbuch
DEUTSCHLAND
Tel: +49/7157/53046-0
[email protected]