mipa RAL 7000 Feh gray 1K acrylic paint spray 400ml
Product number:
9793600
Manufacturer number:
214007000
€11.99*
Content:
0.4 l
(€29.98* / 1 l)
In stock. Usually ships within 1 business day.
mipa Primer filler spray 400ml Color beige - yellowish primer
Content: 0.4 l (€29.98* / 1 l)
€11.99*
| Content: | 400 ml |
|---|---|
| Untergrund: | Universal |
| Besondere Kennzeichnung: | EUH066 |
| Color: | Grey |
| Gefahrenhinweise: | H220, H222, H223, H224, H225, H226, H228, H229, H280, H319, H336 |
| Art: | Spray |
| Sicherheitshinweise: | P101, P102, P103, P210, P211, P251, P305, P351, P338, P410, P412, P501 |
| Piktogramme: | GHS02, GHS07 |
Intended use
Mipa Lack Spray "RAL COLOR" is a high-quality acrylic paint in standard RAL colours. Ensures colour-matched paintworks and touch-ups in RAL colours. Suitable for all substrates. Especially suitable for refinishing machines, machinery parts, tools, vehicles, etc.
Characteristics
Processing instructions:
Substrates
Fully cured and sanded old paintworks, well dried Mipa 1K and 2K filler materials.
Pre-treatment / cleansing
Pre-clean with Mipa Silikonentferner. Please refer to the section “Substrate preparation“ for detailed information.
Preparation
Before use, shake can vigorously for 1 - 2 minutes!
Application
Spray to test - spray distance approx. 20 - 30 cm 2 - 3 coats, dry film thickness: 40 - 50 ?m
Flash-off time
3 - 5 min between coats
After use
After use, turn can upside down and spray until the valve is clean, this prevents the valve from clogging up.
Drying times at 20 °C
Processing conditions
From +10 °C and up to 80 % relative air humidity. Ensure adequate air ventilation.
Storage
Can be stored for 2 years in cool and dry places.
VOC-regulation
EU limit value for this product (cat. B/e): 840 g/l
This product contains max. 700 g/l of VOC.
Substrate preparation:
Remove old coatings or primers that have not cured or are not sound.
Do not use on thermoplastic substrates.
Intact, sound old paintworks, factory paintings:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.
Cathodic e-coating / shop primer:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with MP Softpad Superfine or with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.
2.2 Label elements 3/2021
· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.
· Signal word Danger
· Hazard-determining components of labelling:
acetone
n-Butyl acetate
2-Methoxy-1-methylethyl acetate
· Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
· Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
Buildup of explosive mixtures possible without sufficient ventilation.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
Mipa Lack Spray "RAL COLOR" is a high-quality acrylic paint in standard RAL colours. Ensures colour-matched paintworks and touch-ups in RAL colours. Suitable for all substrates. Especially suitable for refinishing machines, machinery parts, tools, vehicles, etc.
Characteristics
- Fast-drying
- Excellent hiding power
- Lightfast and non-yellowing
- High surface hardness Scratch- and shock-resistant
- Highly pigmented, pure 1K acrylic quality
- glossy except matt and silk matt (see item description)
Processing instructions:
Substrates
Fully cured and sanded old paintworks, well dried Mipa 1K and 2K filler materials.
Pre-treatment / cleansing
Pre-clean with Mipa Silikonentferner. Please refer to the section “Substrate preparation“ for detailed information.
Preparation
Before use, shake can vigorously for 1 - 2 minutes!
Application
Spray to test - spray distance approx. 20 - 30 cm 2 - 3 coats, dry film thickness: 40 - 50 ?m
Flash-off time
3 - 5 min between coats
After use
After use, turn can upside down and spray until the valve is clean, this prevents the valve from clogging up.
Drying times at 20 °C
- Dust dry after approx. 5 - 10 min
- Set to touch after approx. 20 - 30 min
- Ready for assembly after approx. 12 h
Processing conditions
From +10 °C and up to 80 % relative air humidity. Ensure adequate air ventilation.
Storage
Can be stored for 2 years in cool and dry places.
VOC-regulation
EU limit value for this product (cat. B/e): 840 g/l
This product contains max. 700 g/l of VOC.
Substrate preparation:
Remove old coatings or primers that have not cured or are not sound.
Do not use on thermoplastic substrates.
Intact, sound old paintworks, factory paintings:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.
Cathodic e-coating / shop primer:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with MP Softpad Superfine or with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.
2.2 Label elements 3/2021
· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.
· Signal word Danger
· Hazard-determining components of labelling:
acetone
n-Butyl acetate
2-Methoxy-1-methylethyl acetate
· Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
· Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
Buildup of explosive mixtures possible without sufficient ventilation.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
MIPA SE
Am Oberen Moos 1
84051 Essenbach
DEUTSCHLAND