FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

-40%

RPM: 12600
Scale: 1:10
Weight (g): 16
Engine-type: Brushed
Selection category: Motor
Engine type 2: Inrunner
Drive Type: Electric

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 180 4.5 V is a brushed electric motor size "180" with a shaft with a diameter 1.5mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (3x1.2" propeller) or with a gearbox for a small car and boat models.

For controlling the RPM, you will need an ESC with a load capacity of 3–6A.

FOXY 180 4.5V is a suitable replacement for a motor SPEED 180 4.5V (product number 6392).

Set contains:
  • Brushed electric motor FOXY 180 4.5V
  • User manual

Specifications:
  • Voltage [V]4.5
  • Voltage [V]3.7 - 7.4
  • RPM at rated voltage [ot./min]12600
  • ESC [A]3 - 6
  • Diameter [mm]17.1
  • Length [mm]18
  • Shaft diameter [mm]1.5
  • Free shaft length [mm]3
  • Weight [g]16


Pelikan
Pelikan Foxy 180 4.5V DC motor
Product number: 9790269
Manufacturer number: 3BD1000

€2.99*

% €4.99* (40.08% saved)

Prices incl. VAT plus shipping costs

In stock. Usually ships within 1 business day.

RPM: 12600
Scale: 1:10
Weight (g): 16
Engine-type: Brushed
Selection category: Motor
Engine type 2: Inrunner
Drive Type: Electric

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 180 4.5 V is a brushed electric motor size "180" with a shaft with a diameter 1.5mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (3x1.2" propeller) or with a gearbox for a small car and boat models.

For controlling the RPM, you will need an ESC with a load capacity of 3–6A.

FOXY 180 4.5V is a suitable replacement for a motor SPEED 180 4.5V (product number 6392).

Set contains:
  • Brushed electric motor FOXY 180 4.5V
  • User manual

Specifications:
  • Voltage [V]4.5
  • Voltage [V]3.7 - 7.4
  • RPM at rated voltage [ot./min]12600
  • ESC [A]3 - 6
  • Diameter [mm]17.1
  • Length [mm]18
  • Shaft diameter [mm]1.5
  • Free shaft length [mm]3
  • Weight [g]16


This website uses cookies to ensure the best experience possible. More information...