Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.
Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.
FOXY 250 7.2 V is a brushed electric motor size "250" with a shaft with a diameter 2.0mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (4x3.5" propeller) or with a gearbox for a small car and boat models.
For controlling the RPM, you will need an ESC with a load capacity of 6–8A.
FOXY 250 7.2V is a suitable replacement for a motor SPEED 250 7.2V (product number 6374).
Set contains:- Brushed electric motor FOXY 250 7.2V
- User manual
Specifications:- Voltage [V]7.2
- Voltage [V]3.7 - 7.4
- RPM at rated voltage [ot./min]15000
- ESC [A]6 - 8
- Diameter [mm]20
- Length [mm]25
- Shaft diameter [mm]2
- Free shaft length [mm]8.5
- Weight [g]22
