Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.
Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.
FOXY 700 BB Turbo 12V is a brushed electric motor size "700" with a shaft with a diameter 5.0mm and ball bearings. It is suitable for powering aircraft models with direct drive (9x4-6" propeller) or with a gearbox for a small car and boat models (40–45mm propeller).
For controlling the RPM, you will need an ESC with a load capacity of 60–80A.
FOXY 700 BB Turbo 12V is a suitable replacement for a motor SPEED 700 BB Turbo 12V (product number 6317).
Set contains:- Brushed electric motor FOXY 700 BB Turbo 12V
- User manual
Specifications:- Voltage [V]12
- Voltage [V]7.2 - 20
- RPM at rated voltage [ot./min]11600
- ESC [A]60 - 80
- Diameter [mm]42.2
- Length [mm]66
- Shaft diameter [mm]5
- Free shaft length [mm]14
- Weight [g]350
