Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

RPM: 18000
Scale: 1:10
Weight (g): 370
Engine-type: Brushed
Selection category: Motor
Engine type 2: Inrunner
Drive Type: Electric

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 700 Race 9.6V is a brushed electric motor size "700" with a shaft with a diameter 5.0mm and plain bearings. It is suitable for powering aircraft models with direct drive (9x4" propeller) or with a gearbox for a small car and boat models (35–40mm propeller).

For controlling the RPM, you will need an ESC with a load capacity of 60–80A.

FOXY 700 Race 9.6V is a suitable replacement for a motor SPEED 700 Race 9.6V.

Set contains:
  • Brushed electric motor FOXY 700 Race 9.6V
  • User manual

Specifications:
  • Voltage (jmenovité) [V]9.6
  • Voltage (provozní) [V]4.8 - 20
  • RPM at rated voltage [ot./min]18000
  • ESC [A]60 - 80
  • Diameter [mm]42.2
  • Length (sk?ín?) [mm]66
  • Shaft diameter [mm]5
  • Free shaft length [mm]10.5
  • Weight [g]370


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

KAVAN Europe s.r.o.
Doubravice 110
53353 PARDUBICE
TSCHECHISCHE REPUBLIK
Tel: +420466260133
[email protected]

Pelikan Foxy 700 race 9.6V DC motor
Product number: 9790261
Manufacturer number: 3BD1040

€14.99*

% €25.99* (42.32% saved)

No longer available

RPM: 18000
Scale: 1:10
Weight (g): 370
Engine-type: Brushed
Selection category: Motor
Engine type 2: Inrunner
Drive Type: Electric

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 700 Race 9.6V is a brushed electric motor size "700" with a shaft with a diameter 5.0mm and plain bearings. It is suitable for powering aircraft models with direct drive (9x4" propeller) or with a gearbox for a small car and boat models (35–40mm propeller).

For controlling the RPM, you will need an ESC with a load capacity of 60–80A.

FOXY 700 Race 9.6V is a suitable replacement for a motor SPEED 700 Race 9.6V.

Set contains:
  • Brushed electric motor FOXY 700 Race 9.6V
  • User manual

Specifications:
  • Voltage (jmenovité) [V]9.6
  • Voltage (provozní) [V]4.8 - 20
  • RPM at rated voltage [ot./min]18000
  • ESC [A]60 - 80
  • Diameter [mm]42.2
  • Length (sk?ín?) [mm]66
  • Shaft diameter [mm]5
  • Free shaft length [mm]10.5
  • Weight [g]370


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

KAVAN Europe s.r.o.
Doubravice 110
53353 PARDUBICE
TSCHECHISCHE REPUBLIK
Tel: +420466260133
[email protected]