Filter
–
–
–
ABSIMA EVO Crawler "Power Wagon V2" 1/18 orange 2-Gear RTR
€159.95*
Product no.:
9798176
Manufacturer no.:
18022V2
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles. The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class! Highlights New EVO Features and Functions:New* oversized 130 "Crawler Spec" brushed motor (100T)New* developed 2-speed steel gear shift (switchable on radio CH3)New extreme portal axles with steel gears for even more ground clearanceNew* motor mount (even for bigger motors like 180 & 240 size)New* reinforced drive shafts front & rearNew* LCG-optimized chassis layout (Low Center of Gravity)2.4GHz radio systemVehicle lighting operated from the transmitter (CH4) Oversize 1.2" AT wheels with internal beadlock system1kg steering servo with panhard barPPX4 water-resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45°Maximum ground clearance thanks to portal axels and 1.2" wheelsPortal axles front and rear for increased ground clearanceLED lighting front and rear. Operated via channel 4 on the transmitterNewly developed and reinforced front and rear drive shaftsSpecially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel. Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.The motor mount is compatible with brushed and brushless motors up to a size of 240Super-soft 1.2" "All Terrain" wheels with internal bead lock designSimple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain Features:Scale: 1:184WD all-wheel drive2.4GHz radio system "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)100T / 130size brushed motorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain brake (prevents rolling on hills)Digital proportional control for sensitive driving maneuversLED lighting (CH4)Scale body with many attachment parts1.2" bead lock wheels with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutesSpeed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 100T - 130 oversizeNewly developed 2-speed gearsSteel drive and portal axle gearsGear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 160mmGround clearance: 37mmTrack width: 110mmLength: 250mmWidth: 125mmHeight: 135mmWeight: 390g (incl. drive battery)Wheels: 19.5x58mm 18022V2
ABSIMA EVO Crawler "Power Wagon V2" 1/18 green 2-Gear RTR
€159.95*
Product no.:
9798175
Manufacturer no.:
18023V2
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles. The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class! Highlights New EVO Features and Functions:New* oversized 130 "Crawler Spec" brushed motor (100T)New* developed 2-speed steel gear shift (switchable on radio CH3)New extreme portal axles with steel gears for even more ground clearanceNew* motor mount (even for bigger motors like 180 & 240 size)New* reinforced drive shafts front & rearNew* LCG-optimized chassis layout (Low Center of Gravity)2.4GHz radio systemVehicle lighting operated from the transmitter (CH4) Oversize 1.2" AT wheels with internal beadlock system1kg steering servo with panhard barPPX4 water-resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45°Maximum ground clearance thanks to portal axels and 1.2" wheelsPortal axles front and rear for increased ground clearanceLED lighting front and rear. Operated via channel 4 on the transmitterNewly developed and reinforced front and rear drive shaftsSpecially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel. Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.The motor mount is compatible with brushed and brushless motors up to a size of 240Super-soft 1.2" "All Terrain" wheels with internal bead lock designSimple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain Features:Scale: 1:184WD all-wheel drive2.4GHz radio system "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)100T / 130size brushed motorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain brake (prevents rolling on hills)Digital proportional control for sensitive driving maneuversLED lighting (CH4)Scale body with many attachment parts1.2" bead lock wheels with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutesSpeed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 100T - 130 oversizeNewly developed 2-speed gearsSteel drive and portal axle gearsGear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 160mmGround clearance: 37mmTrack width: 110mmLength: 250mmWidth: 125mmHeight: 135mmWeight: 390g (incl. drive battery)Wheels: 19.5x58mm 18023V2
ABSIMA EVO Crawler "Rock Van V2" 1/18 blue/orange 2-Gear RTR
€159.95*
Product no.:
9798174
Manufacturer no.:
18028V2
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles. The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class! Highlights New EVO Features and Functions:New* oversized 130 "Crawler Spec" brushed motor (100T)New* developed 2-speed steel gear shift (switchable on radio CH3)New extreme portal axles with steel gears for even more ground clearanceNew* motor mount (even for bigger motors like 180 & 240 size)New* reinforced drive shafts front & rearNew* LCG-optimized chassis layout (Low Center of Gravity)2.4GHz radio systemVehicle lighting operated from the transmitter (CH4) Oversize 1.2" AT wheels with internal beadlock system1kg steering servo with panhard barPPX4 water-resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45°Maximum ground clearance thanks to portal axels and 1.2" wheelsPortal axles front and rear for increased ground clearanceLED lighting front and rear. Operated via channel 4 on the transmitterNewly developed and reinforced front and rear drive shaftsSpecially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel. Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.The motor mount is compatible with brushed and brushless motors up to a size of 240Super-soft 1.2" "All Terrain" wheels with internal bead lock designSimple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain Features:Scale: 1:184WD all-wheel drive2.4GHz radio system "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)100T / 130size brushed motorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain brake (prevents rolling on hills)Digital proportional control for sensitive driving maneuversLED lighting (CH4)Scale body with many attachment parts1.2" bead lock wheels with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutesSpeed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 100T - 130 oversizeNewly developed 2-speed gearsSteel drive and portal axle gearsGear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 160mmGround clearance: 37mmTrack width: 110mmLength: 284mmWidth: 125mmHeight: 130mmWeight: 480g (incl. drive battery)Wheels: 19.5x58mm 18028V2
ABSIMA EVO Crawler "Trail Hunter V2" 1/18 camo 2-Gear RTR
€159.95*
Product no.:
9798172
Manufacturer no.:
18030V2
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles. The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class! Highlights New EVO Features and Functions:New* oversized 130 "Crawler Spec" brushed motor (100T)New* developed 2-speed steel gear shift (switchable on radio CH3)New extreme portal axles with steel gears for even more ground clearanceNew* motor mount (even for bigger motors like 180 & 240 size)New* reinforced drive shafts front & rearNew* LCG-optimized chassis layout (Low Center of Gravity)2.4GHz radio systemVehicle lighting operated from the transmitter (CH4) Oversize 1.2" AT wheels with internal beadlock system1kg steering servo with panhard barPPX4 water-resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45°Maximum ground clearance thanks to portal axels and 1.2" wheelsPortal axles front and rear for increased ground clearanceLED lighting front and rear. Operated via channel 4 on the transmitterNewly developed and reinforced front and rear drive shaftsSpecially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel. Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.The motor mount is compatible with brushed and brushless motors up to a size of 240Super-soft 1.2" "All Terrain" wheels with internal bead lock designSimple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain Features:Scale: 1:184WD all-wheel drive2.4GHz radio system "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)100T / 130size brushed motorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain brake (prevents rolling on hills)Digital proportional control for sensitive driving maneuversLED lighting (CH4)Scale body with many attachment parts1.2" bead lock wheels with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutesSpeed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 100T - 130 oversizeNewly developed 2-speed gearsSteel drive and portal axle gearsGear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 158,5mmGround clearance: 43,7mmTrack width: 110mmLength: 241mmWidth: 125mmHeight: 130,8mmWeight: 430g (incl. drive battery)Wheels: 19.5x58mm 18030V2
ABSIMA EVO Crawler "Trail Hunter V2" 1/18 blue 2-Gear RTR
€159.95*
Product no.:
9798156
Manufacturer no.:
18031V2
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles. The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!New EVO Features and FunctionsNew* oversized 130 "Crawler Spec" brushed motor (100T)New* developed 2-speed steel gear shift (switchable on radio CH3)New extreme portal axles with steel gears for even more ground clearanceNew* motor mount (even for bigger motors like 180 & 240 size)New* reinforced drive shafts front & rearNew* LCG-optimized chassis layout (Low Center of Gravity)and also...2.4GHz radio systemVehicle lighting operated from the transmitter (CH4) Oversize 1.2" AT wheels with internal beadlock system1kg steering servo with panhard barPPX4 water-resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45°Maximum ground clearance thanks to portal axels and 1.2" wheelsFeatures:Scale: 1:184WD all-wheel drive2.4GHz radio system "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)100T / 130size brushed motorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain brake (prevents rolling on hills)Digital proportional control for sensitive driving maneuversLED lighting (CH4)Scale body with many attachment parts1.2" bead lock wheels with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutesSpeed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 100T - 130 oversizeNewly developed 2-speed gearsSteel drive and portal axle gearsGear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 158,5mmGround clearance: 43,7mmTrack width: 110mmLength: 241mmWidth: 125mmHeight: 130,8mmWeight: 430g (incl. drive battery)Wheels: 19.5x58mm 18031V2
ABSIMA Buggy "AB3.4-V2" 1/10 4WD KIT
€104.95*
Product no.:
9798024
Manufacturer no.:
12222V2KIT
The success story continues! We have equipped the AB3.4 "V2" KIT with some new features that take the vehicle to the next evolutionary stage. Some technical changes have been made to our 1:10 buggy - among other things, the vehicle now comes with LED lighting on the roof.Highlights:NEW* LED lightingNEW* Downforce rear wingNEW* even more tuning parts availableThe KIT version is a kit that can be assembled with standard tools such as pliers and screwdrivers. Shock absorbers and gearbox units are already pre-assembled so that even children can build this vehicle under parental supervision. You can also decide for yourself which electronic components should be installed in the vehicle. The kit includes 2 gear units - a copper/plastic version with the gear ratio for brushed motors and a full metal version designed for a brushless drive. This means that there are no limits to the motorization.Features:4WD all-wheel drive4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer driving time)Many aluminum tuning parts availableDimensions (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270mmGround clearance: approx. 30mmTrack width: 215mm front/rearFront wheels: Ø 88mm / width: 33mmRear wheels: Ø 88mm / width: 42mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmGear ratio BRUSHED version: pinion: 23T / main gear: 64T (module 0.6)Gear ratio BRUSHLESS version: pinion: 26T / main gear: 64T (module 0.6) 12222V2KIT
ABSIMA Buggy "AB3.4-V2 BL" 1/10 4WD Brushless RTR
€279.95*
Product no.:
9798023
Manufacturer no.:
12242V2
The success story continues! We have equipped the AB3.4 "V2" brushless with some new features that bring the vehicle to the next level of evolution. Some technical changes have been implemented in our 1/10th scale buggy - among other things, the vehicle now comes with LED lighting on the roof. Some technical changes have been implemented in our 1/10th scale buggy - among other things, the vehicle now comes with LED lighting on the roofHighlights:NEW* 60A brushless speed controller withT-connector and 3421KV motorNEW* Programmable speed controllerNEW* 6kg steering servoNEW* LED lightingNEW* Downforce rear wingNEW* even more option parts availableThe new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item 2110062) can be used to set various parameters such as braking force, punch, low voltage protection and more. The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminum driveshaft. A 6kg servo handles the conversion of the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving. 4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.Features:2.4GHz 4-channel radio systemAluminum oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outdrivesAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts available 12242V2
ABSIMA Buggy "AB3.4-V2" 1/10 4WD Brushed RTR
€149.95*
Product no.:
9798022
Manufacturer no.:
12222V2
The success story continues! We have equipped the AB3.4 "V2" with some new features that bring the vehicle to the next level of evolution. Some technical changes have been implemented in our 1/10th scale buggy - among other things, the vehicle now comes with LED lighting on the roof.Highlights:NEW* 80A brushed speed controller withT-connector and 540 motorNEW* Programmable speed controllerNEW* 6kg steering servoNEW* LED lightingNEW* Downforce rear wingNEW* even more option parts availableThe new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity. 4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 6kg servo takes over the implementation of the steering commands.Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.Features:4WD all wheel drive2.4 GHz 4-channel radio systemOil shock absimrbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts availableDimensions (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270mmGround clearance: ca. 30mmTrack width: 215mm front/rearFront wheels: Ø 88mm / Width: 33mmRear wheels: Ø 88mm / Width: 42mmShock absorber oil: 400CPSShock absorber installation length: 90mmMotor ratio: pinion: 23T / main gear: 64T (module 0,6) 12222V2
ABSIMA Truggy "AT3.4-V2" 1/10 4WD KIT
€109.95*
Product no.:
9798021
Manufacturer no.:
12223V2KIT
The success story continues! We have equipped the AT3.4 "V2" KIT with some new features that take the vehicle to the next evolutionary stage. Some technical changes have been made to our 1:10 Truggy - among other things, the vehicle now comes with LED lighting on the roof.Highlights:NEW* Body in new race designNEW* LED lightingNEW* Downforce rear wingNEW* even more tuning parts availableThe KIT version is a kit that can be assembled with standard tools such as pliers and screwdrivers. Shock absorbers and gearbox units are already pre-assembled so that even children can build this vehicle under parental supervision. You can also decide for yourself which electronic components should be installed in the vehicle. The kit includes 2 gear units - a copper/plastic version with the gear ratio for brushed motors and a full metal version designed for a brushless drive. This means that there are no limits to the motorization.Features:4WD all-wheel drive4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish Truggy body with add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminum tuning parts availableDimensions (L/W/H): 405x325x165 mmWeight: 1180gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels: Ø 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmGear ratio BRUSHED version: pinion: 18T / main gear: 64T (module 0.6)Gear ratio BRUSHLESS version: pinion: 23T / main gear: 64T (module 0.6) 12223V2KIT
ABSIMA Truggy "AT3.4V2" 1/10 4WD Brushed RTR
€159.95*
Product no.:
9798019
Manufacturer no.:
12223V2
The success story continues! We have equipped the AT3.4 "V2" with some new features that bring the vehicle to the next level of evolution. Some technical changes have been implemented in our 1/10th scale truggy - among other things, the vehicle now comes with LED lighting on the roof.Highlights:NEW* 80A brushed speed controller withT-connector and 540 motorNEW* Programmable speed controllerNEW* 15kg steering servo with metal gearsNEW* LED lightingNEW* Race body with many add-on partsNEW* even more option parts availableThe new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity. 4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.Features:4WD all wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T motor with 32.000RPM @ 7.4V15kg MG steering servo (25T, ball bearings)Oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish truggy body with add-on parts"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts availableDimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: ca. 35mmTrack width: 270mm front/rearWheels front/rear: Ø 105mm / Width: 55mmShock absorber oil: 400CPSShock absorber installation length: 90mmMotor ratio: pinion: 18T / main gear: 64T (module 0,6) 12223V2
ABSIMA Monster Truck "AMT3.4-V2 BL" 1/10 4WD Brushless RTR
€289.95*
Product no.:
9798018
Manufacturer no.:
12244V2
The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.Highlights:NEW* 60A brushless speed controller with T connector and 3421KV motorNEW* Programmable speed controllerNEW* 15 kg steering servo with metal gearNEW* LED lightingNEW* Monster Truck body with many add-on partsNEW* even more option parts available The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs. Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles. Features: 4WD all wheel drive2.4GHz 4-channel radio system8 Aluminium oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outdrivesAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium engine mount6mm shock towers2 differentials (front/rear)Stylish Monster Truck body with add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminum option parts availableDimensions (L/W/H): 425x300x200 mmWeight: 2090gWheelbase: 270mmGround clearance: approx. 45mmTrack width: 250mm front/rearWheels front/rear: Ø 116mm / Width: 57mmShock absorber oil: 400CPSShock absorber installation length: 100mmMotor ratio: 17T / main gear: 64T (module 0.6) 12244V2
ABSIMA Monster Truck "AMT3.4-V2" 1/10 4WD Brushed RTR
€169.95*
Product no.:
9798017
Manufacturer no.:
12224V2
The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution. Some technical changes have been implemented in our 1/10th scale monster truck - among other things, the vehicle now comes with LED lighting on the roofHighlights: NEW* 80A brushed speed controller withT-connector and 540 motorNEW* Programmable speed controllerNEW* 15kg steering servo with metal gearsNEW* LED lightingNEW* Monster truck body with many add-on partsNEW* even more option parts availableThe new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.The car is powered by a 550size 18T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity. 8(!) oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles. Features: 4WD all wheel drive2.4 GHz 4-channel radio system8 Oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish truggy body with add-on parts"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts availableDimensions (L/W/H): 425x300x200 mmWeight: 2070gWheelbase: 270mmGround clearance: ca. 45mmTrack width: 250mm front/rearWheels front/rear: Ø 116mm / Width: 57mmShock absorber oil: 400CPSShock absorber installation length: 100mmMotor ratio: pinion: 17T / main gear: 64T (module 0,6) 12224V2
ABSIMA Monster Truck "MINI AMT" 1/16 yellow/green 4WD RTR
€79.95*
Product no.:
9797581
Manufacturer no.:
16008
Discover your modeling soul with the "First Step Performance" from Absima. The Mini AMT monster truck is over 36 KM/H fast and has plenty of power! Of course you are supported by real model building technology. In addition to a safe 2.4 GHz remote control, a 40A speed controller unleashes the power at your command and let the fun begin. Small, sleek and fast - take your first step into the world of model building.HIGHLIGHTS:Splash-proof Battery and USB charger included LED headlight and wheelie bar included Original spare parts available 4WD all-wheel driveFull bearing2 differentials High current plug (T-plug) High power motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Driving time with fully charged battery: +/- 20 MinutenAluminum cardan driveAdjustable speed on transmitterOverheat protectionLED front light2.4-GHz remote control systzem includedBody with decal sheet for your own designWheelie bar (included)Features:Dimensions (L/W/H): 270 x 215 x 130 mmWeight: 730 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front/rearTires: Monster Rubber / 5 double spoke rimWheels front/rear: 40 mm / Ø ± 80 mmShock absorber installation length front/rear: 70 mm 16008
ABSIMA Monster Truck "MINI AMT" 1/16 pink/blue 4WD RTR
€79.95*
Product no.:
9797580
Manufacturer no.:
16007
Discover your modeling soul with the "First Step Performance" from Absima. The Mini AMT monster truck is over 36 KM/H fast and has plenty of power! Of course you are supported by real model building technology. In addition to a safe 2.4 GHz remote control, a 40A speed controller unleashes the power at your command and let the fun begin. Small, sleek and fast - take your first step into the world of model building.HIGHLIGHTS:Splash-proof Battery and USB charger included LED headlight and wheelie bar included Original spare parts available 4WD all-wheel driveFull bearing2 differentials High current plug (T-plug) High power motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Driving time with fully charged battery: +/- 20 MinutenAluminum cardan driveAdjustable speed on transmitterOverheat protectionLED front light2.4-GHz remote control systzem includedBody with decal sheet for your own designWheelie bar (included)Features:Dimensions (L/W/H): 270 x 215 x 130 mmWeight: 730 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front/rearTires: Monster Rubber / 5 double spoke rimWheels front/rear: 40 mm / Ø ± 80 mmShock absorber installation length front/rear: 70 mm 16007
-29%
ABSIMA CR-18pro 1:18 Pro Crawler Trail Hunter sand RTR
€119.95*
€169.95*
(29.42% saved)
Product no.:
9795031
Manufacturer no.:
18031
Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18031
-29%
ABSIMA CR-18pro 1:18 Pro Crawler Trail Hunter green RTR
€119.95*
€169.95*
(29.42% saved)
Product no.:
9795030
Manufacturer no.:
18030
Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18030
-20%
ABSIMA 1:24 Micro Crawler "Defender" beige RTR
€79.95*
€99.95*
(20.01% saved)
Product no.:
9794395
Manufacturer no.:
10021
The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10021
-20%
ABSIMA 1:24 Enemy Aircraft "Defender" blue RTR
€79.95*
€99.95*
(20.01% saved)
Product no.:
9794394
Manufacturer no.:
10020
The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10020
-10%
ABSIMA 1:24 Micro Crawler "Jimny" green RTR
€89.95*
€99.95*
(10.01% saved)
Product no.:
9794392
Manufacturer no.:
10023
The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10023
-15%
ABSIMA 1:18 Mini Crawler "Power Wagon" blue RTR
€109.95*
€129.95*
(15.39% saved)
Product no.:
9794307
Manufacturer no.:
18023
Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18023
-15%
ABSIMA 1:18 Mini Crawler "Power Wagon" grey RTR
€109.95*
€129.95*
(15.39% saved)
Product no.:
9794306
Manufacturer no.:
18022
Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18022
-15%
ABSIMA 1:18 Mini Crawler "C10 Pickup" red RTR
€109.95*
€129.95*
(15.39% saved)
Product no.:
9794305
Manufacturer no.:
18021
Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18021
-15%
ABSIMA 1:18 Mini Crawler "C10 Pickup" black RTR
€109.95*
€129.95*
(15.39% saved)
Product no.:
9794304
Manufacturer no.:
18020
Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18020
-13%
ABSIMA 1:24 EP 2WD Touring/Drift Car "X Racer" RTR RTR with ESP
€34.95*
€39.95*
(12.52% saved)
Product no.:
9794218
Manufacturer no.:
10011
Small car - big power!RTR version with battery, charger and remote controlSpeed +20 km/hFull digital proportional controlElectronic Stability Program (ESP) Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub. Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home! The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun!The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.FEATURES:2WD rear wheel drive2.4GHz remote controlFully proportional controlMaximum speed can be limited on the remote controlRemovable batterySPECIFICATION:Servo: 3.7g ServoMotor: 8520 Coreless MotorBattery: 3.7V 300mAh LiPo BatterySpeed throttleable: YesESP built in: YesCharging time: approx. 30-40 minutesDriving time: approx. 20 minutesDimensions (L/W/H): 155x95x65 mmWeight: 110 g 10011
-17%
ABSIMA CR3.4 "LANDI" grey RTR Crawler - LIMITED EDITION
€499.95*
€599.95*
(16.67% saved)
Product no.:
9794174
Manufacturer no.:
12018
he CR3.4 LANDI Scale Crawler is a high-end car loaded with technical features which are unusual for a "ready-to-run" vehicle!This limited edition comes in a fancy "ABS hard plastic body" with lots of moving parts like doors and engine hood.In addition, attractive details such as light bowls, radiator grille, wipers, door handles and clear windows so that you can examine the wonderful interior.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Our new oil-filled shocks with 3mm piston rods and outboard springs provide even a better and more realistic response. Tuning springs are also available in soft and hard (sold separately). Portal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle "jumps" over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure a smooth running.A unique hydraulic steering shock absorber design combined with a 15kg digital and waterproof steering servo, hardened steel drive shafts and a 45.8° steering angle provide the best options for any terrain.The CR3.4 chassis has a 2-speed transmission that allows you to overcome difficult terrain and also quickly get to the next obstacle. Simply press a button on the remote control and change from gear ratio 1/37.1 (Low Speed) to 1/15.1 (High Speed)Lock and unlock the front and rear differentials independently for maximum performance on the track, all remotely controlled with your remote and 2 built-in mini servos. Leave the differential unlocked for smooth hadling at high speeds. On technically challenging trails, you can lock the front differential, the rear differential, or even both to tackle extreme terrain. An aluminum motor mount and adjustable slip clutch provide added protection in extreme conditions.Hardened steel differential gears and drive parts - designed for high loads.The drive concept - powered by HOBBYWING - includes a 60A waterproof speed controller and a 600 motor with monster torque. Set the "jumpers to the right position to set your battery type (NiMH / LiPo) and driving mode (forward / reverse / brake).A 15kg digital steering servo with metal gears and 3x 17g mini servos with 0.9kg actuating force for gear ratio and differential lock/unlock are already installed. All servos are waterproof.The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether lights, 2-speed transmission, differential locks or setting the top speed.As standard, the ABSIMA Landi comes with switchable headlights and taillights.If you want to expand the lighting, no problem! All light shells are already mounted, so that nothing stands in the way of a separately available light unit.Stylish 1.9-inch beadlock wheels with aluminum rings and 10-bolt design and super soft tires with realistic sidewall flex for maximum traction on any rockWheel size: 43x120 mm Rocksliders and molded inner fenders protect the chassis from dirt and damage.The body is attached to the chassis with 4 wing nuts.A bracket for a spare wheel is already mounted at the rear.CAR SPECS:Length: 542mmWidth: 250mmHeight: 240mmGround Clearance: 53mmWheelbase: 313mmWeight: 2970gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Wheels: 12mm Hex Beadlock 1.9" 32x69mm Tires: 43x120mmShock Length: 90mmShock Oil Viscosity: 500cpsTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote shifting Gear Pitch: Module 0.8/32dp - Pinion 16Z / Spur Gear 44TDrive System: 4WD ELECTRONIC SPECS:ESC: 60A Brushed/Waterproof with T-Plug (BEC 6V@3A, NiMh/LiPo suitable)Motor: 600 high-torque brushed motor 21TSteering Servo: 15kg MG, digital and waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio system (4.8 - 12.0V LiPo suitable) 12018
-10%
ABSIMA Brushless Touring Car "FUN MAKER" 1/16 stars'n grey RTR
€179.95*
€199.95*
(10% saved)
Product no.:
9792102
Manufacturer no.:
16010
Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired! The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience. Short and sweet: This little powerhouse lies on the road like a board !HIGHLIGHTS:Aluminum chassis for excellent handling characteristicsPowered by a powerful 380 brushless motorHigh performance differentials on front and rear axleIndependent suspension for exceptional handlingIntricately designed, multi-piece bodyshellSpeed: +/- 40 km/hDESIGN:The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.CHASSIS PERFORMANCE:Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!Basically, the structure and arrangement of the components is like a 1:10 competition touring car:Independent suspensionCVD front driveshaftsDifferentials with aluminum pinion gears (38Z) and pinion gears (14Z)Differential gears made of polyamide (12Z/24Z)Aluminum drive bones on rear axleAluminum "big-bore" shock absorbersChassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).DRIVE UNIT:a plenty of power for that scale!Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger includedREMOTE CONTROL & STEERING:A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!FEATURES:4WD All Wheel Drive2.4GHz remote controlFull ball bearing driveAluminum chassis, upper deck and shock towersAluminum "big bore" shock absorbersCVD axles on front axleHeavy duty front & rear differentialsAluminum propshaftLED lighting front & rearExtremely detailed body with sticker sheet SPECIFICATION:Scale: 1:16Dimensions: (L/W/H): 310x140x80mm)Weight (without battery): 560grWheelbase: 175mmGround clearance: approx. 6mmTrack width: 110mm front / 115mm rearWheels front/rear: Ø 50mm / Width: 18mmDamper filled: Yes (100CPS)Damper installation length: 38mmMotor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!) 16010
-10%
ABSIMA Brushless Touring Car "FUN MAKER" 1/16 neon genesis RTR
€179.95*
€199.95*
(10% saved)
Product no.:
9792103
Manufacturer no.:
16011
Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired! The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience. Short and sweet: This little powerhouse lies on the road like a board !HIGHLIGHTS:Aluminum chassis for excellent handling characteristicsPowered by a powerful 380 brushless motorHigh performance differentials on front and rear axleIndependent suspension for exceptional handlingIntricately designed, multi-piece bodyshellSpeed: +/- 40 km/hDESIGN:The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.CHASSIS PERFORMANCE:Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!Basically, the structure and arrangement of the components is like a 1:10 competition touring car:Independent suspensionCVD front driveshaftsDifferentials with aluminum pinion gears (38Z) and pinion gears (14Z)Differential gears made of polyamide (12Z/24Z)Aluminum drive bones on rear axleAluminum "big-bore" shock absorbersChassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).DRIVE UNIT:a plenty of power for that scale!Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger includedREMOTE CONTROL & STEERING:A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!FEATURES:4WD All Wheel Drive2.4GHz remote controlFull ball bearing driveAluminum chassis, upper deck and shock towersAluminum "big bore" shock absorbersCVD axles on front axleHeavy duty front & rear differentialsAluminum propshaftLED lighting front & rearExtremely detailed body with sticker sheet SPECIFICATION:Scale: 1:16Dimensions: (L/W/H): 310x140x80mm)Weight (without battery): 560grWheelbase: 175mmGround clearance: approx. 6mmTrack width: 110mm front / 115mm rearWheels front/rear: Ø 50mm / Width: 18mmDamper filled: Yes (100CPS)Damper installation length: 38mmMotor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!) 16011
-33%
ABSIMA EP Mini Racer Big Foot 1/32 Blue RTR
€19.95*
€29.95*
(33.39% saved)
Product no.:
9788885
Manufacturer no.:
10004
The little speedster actually manages up to 25km/h and that with a length of only 12cm! So much power at this size must also be able to be controlled. Therefore, the small, handy remote control has 2 gears (low and high speed) and the throttle is proportional to operate. Thus, slow, controlled drives as well as wild burnouts can be mastered. Great fun for the living room! Through the 2.4GHz radio technology, up to 8 vehicles can be operated simultaneously.CHANGES COMPARE TO OUR 1ST GENERATION:Charging ports changed to Micro USB Chassis geometry changed for even better handlingFEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cm 10004
-33%
ABSIMA EP Mini Racer Big Foot 1/32 Red/White RTR
€19.95*
€29.95*
(33.39% saved)
Product no.:
9788884
Manufacturer no.:
10003
The little speedster actually manages up to 25km/h and that with a length of only 12cm! So much power at this size must also be able to be controlled. Therefore, the small, handy remote control has 2 gears (low and high speed) and the throttle is proportional to operate. Thus, slow, controlled drives as well as wild burnouts can be mastered. Great fun for the living room! Through the 2.4GHz radio technology, up to 8 vehicles can be operated simultaneously.CHANGES COMPARE TO OUR 1ST GENERATION:Charging ports changed to Micro USB Chassis geometry changed for even better handlingFEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cm 10003
-10%
ABSIMA Desert Buggy "ADB 1.4BL" 1/10 4WD RTR Brushless Waterproof
€279.95*
€309.99*
(9.69% saved)
Product no.:
9786618
Manufacturer no.:
12245
Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image which is unparalleled. The powerful ADB1.4 brushless offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!Highlights:50A HOBBYWING brushless speed controller with T-plug and 3421KV brushless motorOil pressure shock absorber made of aluminum with adjustable preloadLED light bar front and rearAluminum chassis plateSPEED: +/-50 km/hDrive:The 50A HOBBYWING brushless speed controller is waterproof and pre-assembled with a T-plug. The ESC should be used with a 2S LiPo battery. This drives a 3421KV brushless motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two CNC machined differentials (front and rear) are driven by an aluminum driveshaft.Suspension:16mm aluminum oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 brushless and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and feel.Body and Lighting:The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 brushless cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).Finally, there is a full-size spare wheel at the rear of the vehicle.Features:4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm aluminum big bore shocksSteel differential outputs Aluminum chassis plateAdjustable upper suspension arms5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 CNC cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle should be powered by 2-cell (2S) LiPo battery packSpecification:Scale: 1:10Dimensions (L/W/H): 515x320x170 mmWeight: 2550gWheelbase: 290mmGround clearance: approx. 50mmTrack width: 245mm front / 240mm rearWheels front/rear Ø: 128mm / Width: 55mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp) 12245
Ferngesteuerte Autos & Boote online kaufen bei Modellbau Lindinger
Viele von uns träumen bereits in der Kindheit von einem eigenen Modellauto. Das dieses Hobby auch im Erwachsenenalter immer noch Spaß macht beweisen die zahlreichen Wettbewerbe und Veranstaltungen auf der ganzen Welt.
Holen Sie sich den Fahrspaß nach Hause!
Bei uns finden Sie eine Riesenauswahl an Bausätzen (Kit) und Fertigmodellen (ARTR bzw. RTR) in den Bereichen Onroad, Offroad, LKW, Baufahrzeuge, Scale Modelle & Crawler sowie RC-Boote.
Mit namhaften Marken wie beispielsweise Traxxas, Arrma, Axial, Losi und Tamiya garantieren wir Ihnen beste Qualität und 100% Freude an Ihrem Hobby!
Sollte bei einem waghalsigen Sprung oder Wettrennen mit den Kumpels doch mal was kaputt gehen finden Sie bei uns eine übersichtliche Ersatzteilliste sowie Tuningteile für Ihr Modell.