Pilot is a free replica of a modern 20m pilot boat, which can be found on the Baltic and North Seas, for example. Boats of this type are very manoeuvrable and, at around 25-30 knots, also very fast. Your task is to bring the pilots safely to the big ocean liners in all weather conditions. In this model kit, both driving characteristics and driving behavior have been largely adopted. It is built on a modern planing boat hull as a hard chine and, like the originals, is also very manoeuvrable and, with the appropriate drive equipment, also very fast. In the room behind the helm station, there is space for several pilots to be taken to their workplaces with an exit. The properties and driving behavior were incorporated into the model as far as possible. The model was built on a modern planing boat hull, is very fast and manoeuvrable. It is designed as a plastic construction with hard chines. All ABS parts are laser cut and can be glued immediately after being put together. The hull is built on a Depron jig. The drive is provided by two electric motors. The drives can be controlled individually (2 x Multi 25 controllers) or together via a Multi 40 controller. Control is via two rudder systems. The wheelhouse is completely expanded. The etched parts of the dashboard allow the many fittings to be illuminated. All lamps of the model can be illuminated with 3mm LEDs. The two bow lights are very bright and with the black rubbing strip give the model a striking appearance. The searchlight is made of etched parts and is fully articulated. The reflector and the LEDs are matched to each other and have an enormous luminosity and concentration of light. The model can be further expanded according to your own ideas. There is enough space in the fuselage for your own special functions such as a transverse thruster, light or sound.
The model kit contains:
All laser-cut ABS parts required for construction, Depronhelling, fittings, fender, ship's shafts, rudder, as well as the reflectors and LEDs for the headlights. The complex set of etched parts made of nickel silver, which is also included in the kit, contains over 100 parts. This includes the stanchions, headlights, moveable door hinges, dashboard instruments and much more.
Over the past 30 years, the company Aeronaut has been distributed from Modellbau Lindinger due to high quality products and services. The name "Aeronaut", based from the Greek Symbol for air and water, was chosen for the company in the 1970's as they stepped into the RC industry. Aeronaut is well known for self-designed and manufactured products, for example, the CAMCarbon Folding Propeller.
