ABSIMA EVO Crawler "Power Wagon V2" 1/18 orange 2-Gear RTR
Product number:
9798176
Manufacturer number:
18022V2
- 1x Mini EVO Crawler
- 1x 2.4GHz radio system
- 1x LiPo battery 7.4V 600mAh
- 1x USB charging cable
- 1x Sticker sheet
- 1x Manual DE/EN/FR
- 1x Mini tool set
Needed to Complete (not included):
- 4x AAA Batteries for the radio
| Engine Type: | Electric |
|---|---|
| Drivetrain: | 4WD |
| Scale: | 1:18 |
| Length (mm): | 250 |
| Use: | OFFROAD |
| Wide (mm): | 125 |
| Rec. engine: | included |
| Version: | RTR - READY TO RUN |
| Driving Experience: | Beginners |
| Build Skill: | Beginners |
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.
The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!
Highlights
New EVO Features and Functions:
Features:
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!
Highlights
New EVO Features and Functions:
- New* oversized 130 "Crawler Spec" brushed motor (100T)
- New* developed 2-speed steel gear shift (switchable on radio CH3)
- New extreme portal axles with steel gears for even more ground clearance
- New* motor mount (even for bigger motors like 180 & 240 size)
- New* reinforced drive shafts front & rear
- New* LCG-optimized chassis layout (Low Center of Gravity)
- 2.4GHz radio system
- Vehicle lighting operated from the transmitter (CH4)
- Oversize 1.2" AT wheels with internal beadlock system
- 1kg steering servo with panhard bar
- PPX4 water-resistant electronics
- Metal chassis frame
- Painted 1.2mm Lexan body
- Tight turning circle of 80cm
- Driving time of up to 45 minutes
- Steering angle of up to 45°
- Maximum ground clearance thanks to portal axels and 1.2" wheels
- Portal axles front and rear for increased ground clearance
- LED lighting front and rear. Operated via channel 4 on the transmitter
- Newly developed and reinforced front and rear drive shafts
- Specially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel.
- Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.
- The motor mount is compatible with brushed and brushless motors up to a size of 240
- Super-soft 1.2" "All Terrain" wheels with internal bead lock design
- Simple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain
Features:
- Scale: 1:18
- 4WD all-wheel drive
- 2.4GHz radio system
- "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
- 100T / 130size brushed motor
- Differentials fully locked (front & rear)
- Telescopic UJ cardan shafts
- Metal chassis frame
- Drag/Mountain brake (prevents rolling on hills)
- Digital proportional control for sensitive driving maneuvers
- LED lighting (CH4)
- Scale body with many attachment parts
- 1.2" bead lock wheels with super soft AT tires
- Waterproof 1kg mini steering servo
- 2-in-1 speed controller/receiver unit
- Driving time: approx. 45 minutes
- Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
- Remote control: 2.4GHz, 4-channel
- Steering servo: 1kg actuating force, waterproof
- Motor: 100T - 130 oversize
- Newly developed 2-speed gears
- Steel drive and portal axle gears
- Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
- Battery: LiPo 7.4V/2S 600mAh
- Battery connector system: Molex 2-pin
- Wheelbase: 160mm
- Ground clearance: 37mm
- Track width: 110mm
- Length: 250mm
- Width: 125mm
- Height: 135mm
- Weight: 390g (incl. drive battery)
- Wheels: 19.5x58mm
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
ABSIMA GmbH
Gibitzenhofstraße 127A
90443 NÜRNBERG
DEUTSCHLAND
Tel: +49/911 650841 34
[email protected]