Skip to main content

FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

  • 1:12 TOYOTA FJ45 RTR
  • 2.4G Transmitter
  • 2-in-1 Receiver (installed)
  • 180 Brushed Motor (installed)
  • 9g Plastic Digital Servo (installed)
  • 2S 7.4V 380mAh Battery with PCM
  • USB Charger
  • Hex Wrench Socket
  • Product Manual


Need to Complete:
  • 4 x AAA Batteries for Transmitter


Engine Type: Electric
Drivetrain: 4WD
Scale: 1:12
Length (mm): 354
Use: OFFROAD
Wide (mm): 127
Rec. engine: included
Version: RTR - READY TO RUN
Car brand: Toyota
Driving Experience: Beginners
Build Skill: Beginners

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

Features:
  • READY TO RUN MODEL
  • TWO SPEED TRANSMISSION
  • BALL BEARINGS FULL SET
  • POLYSTYRENE BODY
  • NICE PAINTED BODY
  • HOOD CAN BE OPENED
  • BOTH SIDE DOORS CAN BE OPENED
  • TAILGATE CAN BE OPENED
  • SUPER EXQUISITE INTERIOR
  • STEEL C-CHANNEL FRAME
  • LEAF SPRING SUSPENSION
  • REMOTE CONTROL LIGHTING SYSTEM
  • 180 MOTOR

Specification:
  • Height: 124mm
  • Wheel base: 270mm
  • Tire: D:60mm , W:15mm
  • Ground clearance: 29mm
  • Approach angle: 58°
  • Departure angle: 29.9°
  • The Highest Driving speed: 8km/h
  • Remote control distance: 30m
  • Play time: 20 minute


FMS was founded in 2007 in Shenzen and offers beautiful scale foam warbird models. All models are Ready to Fly (requiring only a transmitter, receiver, and battery). They are already finished, sometimes with electric landing gear, and high performance servos, brushless motors, and brushless ESCs. They also offer gliders (sailplanes) and Jets.

FMS
FMS TOYOTA FJ45 1:12 red - Crawler RTR 2.4GHz
Product number: 9798215
Manufacturer number: DPFMS11203RTRRD

€259.00*

No new delivery date is known.  Please register for the stock notification below.  As soon as we receive new information, you will be notified.

  • 1:12 TOYOTA FJ45 RTR
  • 2.4G Transmitter
  • 2-in-1 Receiver (installed)
  • 180 Brushed Motor (installed)
  • 9g Plastic Digital Servo (installed)
  • 2S 7.4V 380mAh Battery with PCM
  • USB Charger
  • Hex Wrench Socket
  • Product Manual


Need to Complete:
  • 4 x AAA Batteries for Transmitter


Engine Type: Electric
Drivetrain: 4WD
Scale: 1:12
Length (mm): 354
Use: OFFROAD
Wide (mm): 127
Rec. engine: included
Version: RTR - READY TO RUN
Car brand: Toyota
Driving Experience: Beginners
Build Skill: Beginners

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

Features:
  • READY TO RUN MODEL
  • TWO SPEED TRANSMISSION
  • BALL BEARINGS FULL SET
  • POLYSTYRENE BODY
  • NICE PAINTED BODY
  • HOOD CAN BE OPENED
  • BOTH SIDE DOORS CAN BE OPENED
  • TAILGATE CAN BE OPENED
  • SUPER EXQUISITE INTERIOR
  • STEEL C-CHANNEL FRAME
  • LEAF SPRING SUSPENSION
  • REMOTE CONTROL LIGHTING SYSTEM
  • 180 MOTOR

Specification:
  • Height: 124mm
  • Wheel base: 270mm
  • Tire: D:60mm , W:15mm
  • Ground clearance: 29mm
  • Approach angle: 58°
  • Departure angle: 29.9°
  • The Highest Driving speed: 8km/h
  • Remote control distance: 30m
  • Play time: 20 minute


FMS was founded in 2007 in Shenzen and offers beautiful scale foam warbird models. All models are Ready to Fly (requiring only a transmitter, receiver, and battery). They are already finished, sometimes with electric landing gear, and high performance servos, brushless motors, and brushless ESCs. They also offer gliders (sailplanes) and Jets.