ABSIMA Sand Buggy ASB1 CAMOUFLAGE-BLAU 1/10 4WD RTR Waterproof (inkl. Akku & Lader)
Product number:
9785239
Manufacturer number:
12208
€199.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
ABSIMA GREENHORN NIMH STICK PACK 7.2V 3000MAH BATTERY WITH T-PLUG CONNECTOR + TAMIYA ADAPTER
€17.95*
€18.95*(5.28% saved)
ABSIMA GREENHORN NIMH STICK PACK 7.2V 4200MAH BATTERY WITH T-PLUG CONNECTOR + TAMIYA ADAPTER
€23.95*
€27.95*(14.31% saved)
- Sand Buggy ASB1 RTR
- 2.4 GHz Radio System CR2SV2
- NiMH Racing Pack
- Plug Charger (EU socket)
- Manual
Required Accessories:
- 4* AA Mignon batteries for the radio
| Engine Type: | Electric |
|---|---|
| Drivetrain: | 4WD |
| Scale: | 1:10 |
| Chassis: | ASB1 |
| Use: | OFFROAD |
| Rec. engine: | Includes |
| Version: | RTR - READY TO RUN |
| Driving Experience: | Beginners |
| Build Skill: | Beginners |
Highlights & Details:
Features:
ATTENTION: If you want to run brushed cars with a LiPo battery, the C-rate should not be higher than 30C. Otherwise the speed controller, motor and connectors could get too hot which can lead a damage!
Specifications:
Speed Controller Technical Data:
Thrust ECO Motor Technical Data:
Servo S40PH Technical Data:
Radio System Technical Data:
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
- 40A waterproof speed controller
- 15T brushed motor
- 2.4 GHz CR2S remote control
- Battery and charger (EU plug)
Features:
- Fully built and equipped all-wheel drive buggy incl. 2.4 GHz remote control, NiMH high-performance battery and charger
- Waterproof and LiPo compatible 40A brushed controller with Tamiya plug
- Water resistant and powerful steering servo with 4kg steering force
- 15 turn 550 size brushed motor with heat sink
- Fully enclosed main drive - prevents ingress of stones or other foreign objects
- Aluminum main drive shaft with steel mounts
- The vehicle is completely ball bearing mounted and therefore very smooth and durable
- Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. when cornering
- Differential outputs made of steel
- The oil shock absorbers can be perfectly adjusted to any slope by knurled screws
- Aluminum engine mount
- Steel CVD shafts on front axle
- Track rods adjustable via right/left-hand thread
- Dirt cover for electronic components (controller, receiver and battery)
- 3mm aluminum shock towers F/R
- Prepared for brushless and LiPo operation
- Extremely durable body
- The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many "accidents" without damage.
ATTENTION: If you want to run brushed cars with a LiPo battery, the C-rate should not be higher than 30C. Otherwise the speed controller, motor and connectors could get too hot which can lead a damage!
Specifications:
- Dimensions ( L/W/H) 430x285x155 mm
- Weight 2170 g
- Wheelbase 293 mm
- Ground clearance 40 mm
- Track front/rear 230 mm
- Tires: Ø ± 105 mm / Width 50 mm front/rear
- Viscosity damper oil: 400 v/h
- Spring: medium
- Damper installation length: 85mm front/rear
- Viscosity differential oil : front 1. 000 / rear 3.000
- Internal gear ratio: bevel gear 13T / ring gear 43T
- Motor gear ratio: main gear 55T / motor pinion 20T (module 0,8)
Speed Controller Technical Data:
- Water-proof 40A Brushed Speed Controller
- NiMH/LiPo operation
- Peak current: 180A
- Functions: Vorward / Brake / Backward
- BEC 5V / 2A
- Operation V: 7.2 - 7.4V
- Motor limit > 12T @ 7.4V; < 30.000 U/min @ 7.2V
- Plug system: Tamiya
Thrust ECO Motor Technical Data:
- 15T / 30.000 U/min
- 550 size
- Motor shaft: Length 9,6mm; Ø 3,17mm
- Motor size: Length 57 mm; Ø 36,7 mm
Servo S40PH Technical Data:
- Size: Standard
- Actuating force: 4,0 kg @ 4.8V
- Actuating time 0,16 Sec / 60° @ 4.8V
- Gears: Nylon
- 25 teeth
- Plug system - JR
- Voltage: 4.8V - 6.6V
- Ball bearing
Radio System Technical Data:
- 2-CH radio CR2SV2
- 3-CH mini receiver
- Reverse function
- Adjustable dual rate and trimming
- Battery case for 4 Mignon AA cells (not included)
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
ABSIMA GmbH
Gibitzenhofstraße 127A
90443 NÜRNBERG
DEUTSCHLAND
Tel: +49/911 650841 34
[email protected]