-10%
DRIVE & FLY MODELS
DRIVE & FLY MODELS HotHammer 5.1 COMPETITION Truck BL - brushless ARTR
Product number:
9795056
Manufacturer number:
3189
€319.95*
% €354.95* (9.86% saved)Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
- RC Truck
- 2,4 GHz channel remote control
- Manual
Needed to Complete (not included):
- Battery 2-3 S 4500-5200mAh
- Charger
| Engine Type: | Brushless Electric |
|---|---|
| Drivetrain: | 4WD |
| Scale: | 1:10 |
| Length (mm): | 460 |
| Use: | OFFROAD |
| Wide (mm): | 340 |
| Rec. engine: | included |
| Version: | RTR - READY TO RUN |
| Driving Experience: | Advanced |
| Build Skill: | Beginners |
Strong, Stronger, XL-Line 5.1 ... upgraded once again!
The 5.1 models are based on the tried and tested 1:10XL 5 models, but have been given some additional parts and modifications. The models are now equipped with a center differential. This distributes the power perfectly between the two axles. An aluminum support for the front axle section ensures greater chassis rigidity. The Hothammer 5.1 is also equipped with an aluminum upper deck. With the new RACE X3 3-channel remote control, a dual-rate function for the throttle is now possible. A switch can be used to select 100, 75 or 50 % maximum power at full throttle. Metal chassis, XL oil-pressure shock absorbers with aluminum parts, aluminum steering levers, steel CVD gimbals and ball bearings naturally remain standard features of the 1:10XL models in the 5.1 version.
The HotHammer 5.1 (No.3189) is equipped with 17mm wheel drivers as well as a powerful 3180kv brushless motor and the DF Models DF-120BL brushless controller with 120 amps of power. The HotHammer 5.1 has enough power to move the model off-road. Rapid drifts, jumps and gravel runs at top speeds of up to 70 km/h (possible in 3S LiPo mode) - that's what the new HotHammer 5.1 is made for! The DF-1500D 15 kg steering servo with XXL steel gearbox provides sufficient power in every situation.
Specifications:
This very new company was incorporated in 2010 and was able to entrench itself in the model making branch within a very short period. They offer Ready-to-Fly models for Quadrocopter and winged-aircraft, as well as Ready-to-run models in the area of RC-cars. The necessary accessories and replacement parts also belong to the assortment of DF-models.
The 5.1 models are based on the tried and tested 1:10XL 5 models, but have been given some additional parts and modifications. The models are now equipped with a center differential. This distributes the power perfectly between the two axles. An aluminum support for the front axle section ensures greater chassis rigidity. The Hothammer 5.1 is also equipped with an aluminum upper deck. With the new RACE X3 3-channel remote control, a dual-rate function for the throttle is now possible. A switch can be used to select 100, 75 or 50 % maximum power at full throttle. Metal chassis, XL oil-pressure shock absorbers with aluminum parts, aluminum steering levers, steel CVD gimbals and ball bearings naturally remain standard features of the 1:10XL models in the 5.1 version.
The HotHammer 5.1 (No.3189) is equipped with 17mm wheel drivers as well as a powerful 3180kv brushless motor and the DF Models DF-120BL brushless controller with 120 amps of power. The HotHammer 5.1 has enough power to move the model off-road. Rapid drifts, jumps and gravel runs at top speeds of up to 70 km/h (possible in 3S LiPo mode) - that's what the new HotHammer 5.1 is made for! The DF-1500D 15 kg steering servo with XXL steel gearbox provides sufficient power in every situation.
Specifications:
- Scale: 1:10XL RTR
- Drive: 4WD brushless
- Height: 190 mm
- Wheelbase: 303 mm
This very new company was incorporated in 2010 and was able to entrench itself in the model making branch within a very short period. They offer Ready-to-Fly models for Quadrocopter and winged-aircraft, as well as Ready-to-run models in the area of RC-cars. The necessary accessories and replacement parts also belong to the assortment of DF-models.
