FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

-10%

“ RC Truggy RTR
“ 2.4 GHz remote control
“ NiMH drive battery - 7.2 Volt - 1800 mAh
“ Charger
“ Manual

Engine Type: Brushless Electric
Drivetrain: 4WD
Scale: 1:10
Length (mm): 485
Use: OFFROAD
Wide (mm): 340
Rec. engine: Includes
Version: RTR - READY TO RUN
Driving Experience: Advanced
Build Skill: Beginners

The proven DF Models BasicLine models are now also available in an XL variant!

Front and rear axle unit are identical to the BasicLine Truck models. The chassis was used from a 1:8 model ... This results in the BasicLine XL model.

The XL Fighter BL comes RTR (Ready To Run) and is equipped with a 3S (11,1 Volt) LiPo drive battery and a LiPo balancer charger. The XL Fighter BL is powered by a 3S LiPo battery in conjunction with a 2000kv motor and 60A brushless controller (Hobbywing WP-10BL60A), allowing top speeds of approximately 70 km/h!

An aluminum motor heat sink with fan provides sufficient cooling for the motor to avoid overheating.

There are already many tuning parts installed from the factory ... A center differential distributes the power of the engine evenly between the front and rear axles. This results in a soft start-up where the power is transferred in a targeted manner. It also protects the model's drive components. Aluminum chassis, aluminum upper deck, aluminum wishbone mounts, oil pressure shock absorbers with aluminum parts, servo with metal gears, CVD shafts front and rear, etc.

A special feature is the new 4-channel remote control. The maximum speed can be reduced by 50% via transmitter. Thus, the models are ideally suited even for novice drivers! The system also has 2 additional switching channels, which can be used, for example, to switch a special function (additional modules may be required).

  • Height: 190 mm
  • Wheelbase: 325 mm
  • Speed: up to 70 km/h
  • Tires: 120x70 mm


This very new company was incorporated in 2010 and was able to entrench itself in the model making branch within a very short period. They offer Ready-to-Fly models for Quadrocopter and winged-aircraft, as well as Ready-to-run models in the area of RC-cars. The necessary accessories and replacement parts also belong to the assortment of DF-models.

DRIVE & FLY MODELS
DRIVE & FLY MODELS XL Fighter BL - 1/10XL 3S Brushless RTR Truggy 3S-Lipo Offroad -70km/h
Product number: 9789500
Manufacturer number: 3168

€319.95*

% €354.95* (9.86% saved)

Prices incl. VAT plus shipping costs

No longer available

“ RC Truggy RTR
“ 2.4 GHz remote control
“ NiMH drive battery - 7.2 Volt - 1800 mAh
“ Charger
“ Manual

Engine Type: Brushless Electric
Drivetrain: 4WD
Scale: 1:10
Length (mm): 485
Use: OFFROAD
Wide (mm): 340
Rec. engine: Includes
Version: RTR - READY TO RUN
Driving Experience: Advanced
Build Skill: Beginners

The proven DF Models BasicLine models are now also available in an XL variant!

Front and rear axle unit are identical to the BasicLine Truck models. The chassis was used from a 1:8 model ... This results in the BasicLine XL model.

The XL Fighter BL comes RTR (Ready To Run) and is equipped with a 3S (11,1 Volt) LiPo drive battery and a LiPo balancer charger. The XL Fighter BL is powered by a 3S LiPo battery in conjunction with a 2000kv motor and 60A brushless controller (Hobbywing WP-10BL60A), allowing top speeds of approximately 70 km/h!

An aluminum motor heat sink with fan provides sufficient cooling for the motor to avoid overheating.

There are already many tuning parts installed from the factory ... A center differential distributes the power of the engine evenly between the front and rear axles. This results in a soft start-up where the power is transferred in a targeted manner. It also protects the model's drive components. Aluminum chassis, aluminum upper deck, aluminum wishbone mounts, oil pressure shock absorbers with aluminum parts, servo with metal gears, CVD shafts front and rear, etc.

A special feature is the new 4-channel remote control. The maximum speed can be reduced by 50% via transmitter. Thus, the models are ideally suited even for novice drivers! The system also has 2 additional switching channels, which can be used, for example, to switch a special function (additional modules may be required).

  • Height: 190 mm
  • Wheelbase: 325 mm
  • Speed: up to 70 km/h
  • Tires: 120x70 mm


This very new company was incorporated in 2010 and was able to entrench itself in the model making branch within a very short period. They offer Ready-to-Fly models for Quadrocopter and winged-aircraft, as well as Ready-to-run models in the area of RC-cars. The necessary accessories and replacement parts also belong to the assortment of DF-models.

This website uses cookies to ensure the best experience possible. More information...