BEASTX MICROBEAST HD PLUS
Product number:
9718183
Manufacturer number:
BXM76500
€174.90*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
- MICROBEAST PLUS HD
- switch cable
- Power supply cable
- Receiver connection cable set
- 3M adhesive pads
- Adjustment tool
- Printed operating instructions
- decal sheet
The MICROBEAST PLUS HD was developed as a heavy-duty version with an additional switchable high-power power connection. It is particularly suitable for helicopters with servos in standard size and meets today's power supply requirements to an unprecedented degree. The power supply is realized by a high-quality plug system that has proven itself in the RC area.
The switch included in the delivery activates the system electronically and remains operational even if the switch is unintentionally disconnected. The High Power power connection can thus also be used without a switch. The MICROBEAST PLUS HD has an aluminium composite housing.
MICROBEAST PLUS and MICROBEAST PLUS HD work with the worldwide proven EasySetup from BEASTX. The well thought-out and simple setup is quick and easy and neither an expensive programming box nor a computer is necessary. This allows many settings on the airfield to be changed easily and without problems.
Further options are available with the optional interface and the StudioX software package. The MICROBEAST PLUS can always be updated by the update functionality and the advanced pilot can adapt the device specifically to his needs.
Technical Data:
Features:
Servo frequencies:
swashplate mixture:
input signals:
The switch included in the delivery activates the system electronically and remains operational even if the switch is unintentionally disconnected. The High Power power connection can thus also be used without a switch. The MICROBEAST PLUS HD has an aluminium composite housing.
MICROBEAST PLUS and MICROBEAST PLUS HD work with the worldwide proven EasySetup from BEASTX. The well thought-out and simple setup is quick and easy and neither an expensive programming box nor a computer is necessary. This allows many settings on the airfield to be changed easily and without problems.
Further options are available with the optional interface and the StudioX software package. The MICROBEAST PLUS can always be updated by the update functionality and the advanced pilot can adapt the device specifically to his needs.
Technical Data:
- Operating voltage: 3.5V - 8.5V DC (operation with 2-cell LiPo possible)
- Processor: 32-bit ARM
- Sensor: 6 axes MEMS (gyro + accelerometer)
- dimensions: 36x25x21mm
- Weight (without cable): approx. 19g
Features:
- Servo-neutral pulses:
- swashplate: 1520µs
- tail: 1520µs, 960µs, 760µs
Servo frequencies:
- swashplate: 50 - 200Hz
- rear: 50 - 560Hz
swashplate mixture:
- mechanical, 90°, 120°, 135°, 140°
- virtual TS rotation (via StudioX)
input signals:
- Single channels
- PPM serial
- SRXL (JR XBus, SUMD, M-Link...)
- Futaba S.Bus/S.Bus2
- Spektrum satellite receiver* (DSM2/DSMX) (* with Spektrum satellite receiver adapter)
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Freakware GmbH
Karl-Ferd.-Braun Str.33
50170 Kerpen
DEUTSCHLAND
Tel: +49 2273 601 88-0
[email protected]