Align's latest development, the T-REX 300X DOMINATOR is factory assembled and comes with the Align A10 10-channel remote control and the Align MiniGRS stabilization system.
T-REX 300X, small but powerful. It has a DFC rotor head unit with low center of gravity and low wind resistance for extremely direct flight control. The carbon fiber main frame is made of composite material and features a reinforcement plate and strut arrangement that effectively improve structural intensity and torsional strength. Its slim design provides a significantly strengthened mechanical structure. The battery holder and the top-mounted motor with a bright red anodized surface give this model a beautiful appearance. The reinforced aluminum tail boom provides excellent torsional strength and extends the life of the tail rotor mechanism. The progressive lightweight construction makes this model the reference model in this class. The consistent design is rounded off by the painted GRP canopy, which is not only extremely light but also ensures very low wind resistance thanks to its aerodynamic shape. text by fw
It is equipped with the Align MiniGRS Flybarless System, which was developed by Align for helicopters up to the 500 class. The standard high torque and high efficiency of the brushless 300MX motor (3700KV / 2216) not only contributes to a dramatic increase in performance; it also enables a constant power output and stable speed in non-stop 3D flight. The highly efficient cooling system creates a lower operating temperature during and after flight compared to the previous generation motor. The built-in Align DS450 and DS455 servos support operation up to 8.4V for fastest response and highest torque. The output voltage of the BEC integrated in the 25A brushless controller can be adjusted from 5.0V to 8.4V.
The T-REX 300X is tiny, but combines all flight characteristics of larger and smaller helicopters, so that it can perform well not only indoors, but also during 3D-flights outdoors. So that you can enjoy flying at all times, this model offers you the best performance at a bargain price. It is lightweight and with easy and quick adjustments it is suitable for most pilots and beginners.
Specifications T-REX 300X
- length: 476mm
- height: 158mm
- width: 88mm
- Main rotor blade length: 230mm
- Main rotor diameter: 525mm
- Tail rotor diameter: 143mm
- Motor pinion: 14Z
- Main gear: 115Z
- Main belt wheel: 40Z
- Tail rotor gearbox: 13Z
- Translation: 8.21:1:3.08
- Weight (without battery): 418g
Technical data A10 remote control
- Channels: 10
- Flight programs: Helicopter / Wing models / Multicopter
- Frequency range: 2.408 ~ 2.475 GHz
- Power: not higher than 20dBm (for EU)
- Modulation: AFHDS 2A
- Operating voltage: 4.0V ~ 6.0V DC
- Range: in the air without obstacles < 1000M
- Low voltage warning: at less than 4.2V
- dimensions: 275x187x102mm
- Weight: 485g (without battery)
Technical data MiniA.BUS receiver
- Channels: 14 channels
- Sensitivity: -105dBm
- Frequency range: 2.4055 ~ 2.475 GHz
- Modulation: AFHDS 2A
- Operating voltage: 4.0V ~ 8.4V DC
- Range: in the air without obstacles <150M
Technical Data MiniGRS Flybarless System
- Operating voltage: DC 3.5~8.4V
- Power consumption: <100mA @ 4.8V
- rotation rate: ±300°/sec
- yaw rate tail rotor: ±600°/sec
- Sensor resolution: 12 Bit
- Swashplate support: 120° CCPM
- Modes: T-REX 250, T-REX 300, T-REX 450, T-REX 470, T-REX 500
- Supported receivers: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX satellites
- Operating temperature: -20? ~ +65?
- Air humidity: 0% ~ 95%
- Dimensions: 37.6x22.4x13mm
Technical data RCC-3X charger
- Input: AC 100V~240V (50/60Hz)
- Output: 2S 7.4V / 3S 11.1V
- Supported battery types: Li-Polymer / Li-ion
- Charging method: CC/CV
- Charging current: 2A
- Dimensions: 123x74.3x32mm
- weight: 260g
Technical data battery
- voltage: 11.1V
- Capacity: 1300mAh
- Watt-hours: 14.4Wh
- Unloading rate: 30C
- Charge rate: up to 5C
- Dimensions: 74x36.5x21mm
- weight: 115g
ALIGN RC Helicopter is one of the leading 3D RC Helicopter companies in the world. Align stands atop in 3D design and performance. The high quality electronics and design leaves nothing left to wish for. Best known for their T-REX 3D helicopters, the T-REX is one of the top brands in the international 3D helicopter scene, with a 3D heli for every class.
