Robbe Modellsport SCIROCCO L 4,0M PNP (YELLOW) FULL-GRP HIGH PERFORMANCE GLIDER W. 4-FLAP WING
Dynamic meets Performance
THE NEW Scirocco „L“ PNP/ARF
...is the further developed version of our successful Scirocco model.
The Scirocco L is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application.
Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 4.0m model is no problem thanks to the strong drive and the low basic speed and can be performed safely by the pilot alone.
Aerobatics and temperament
The "Scirocco L" also unfolds its true temperament in faster and tighter aerobatics, mastering the figures. Despite its electric design, it is also being used more and more often on slopes.
The elaborate shapely design allows excellent attitude recognition.
The wing mating from the center section to the outer surfaces is force-locked and cleanly done by CFRP square spar.
Technical data
Wing-span (mm): | 4000 |
---|---|
Flight weight approx. (g): | 3790 |
Control: | H,S,Q,M,WK |
Length (mm): | 1710 |
Manufacturer: | Robbe |
Fuselage: | Carbon/FiberGlass |
Wings: | Fiberglass/Carbon |
Rec. engine: | beinhaltet |
Rec. Battery: | 4-5S/4000mAh LiXX |
Version: | PNP - PLUG N PLAY |
Airfoil: | HN-354 |
Flight Skill: | Advanced |
Build Skill: | Beginners |
Drive Type: | Electric |
ARF & PNP
The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed in the PNP version, reducing construction time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.
Features:
- compact wingspan of 4.0m
- 3-part wing
- higher maneuverability
- continuous ailerons/flaps (no more bridge)
- Installation of black interchangeable frames for the 6pin connectors provided in mold (already installed in PNP)
- formed flap linkage covers
- separating groove for Multilock system in form
Box contents PNP version
Box contents
- Model SCIROCCO in full GRP/CFRP construction, in mold multicolor painted
- CFK coving
- small material
- Instructions in German/English/French