features:
- 9 primary contacts (redundantly guided; for main functions like servos), 4 secondary contacts (single, for secondary functions like light)
- 3000 mating cycles, 10A for primary contacts, 5A for secondary contacts
- strain relief, handle and bend protection
- Primary and secondary contacts
- Redundancy already in the plug
- Easily accessible contacts and solder joints
- Self-contacting in floating design
- Ready assembled with Uni connector strips
- As kit with all parts and screws
- Mounting template included
- Dimension cover 25x33mm
- Plug weight 15g without cable
uniLIGHT UNICONNECT
The innovative uniCONNECT plug-in system works with solid blade and heavy-duty skirtings. Thanks to the new design, it is now finally possible to realise a high number of poles in a connector with a small size - currently up to 22 pins. In addition, more than 3000 plugging cycles at loads of up to 10A are possible. Optimally realised for use with model making.
The male connectors also offer the advantage that all cables can be reliably and easily soldered without a plastic carrier melting. Strain relief, latching, handle and bend protection are also available. The contacts of the male connectors are always visible, which means that damage and dirt are immediately visible.
However, the greatest advantage of the system is that double redundancy for important control functions is already provided in the plug. For this reason, the system not only specifies conventional pin numbers, but distinguishes between primary pins (double, for main functions) and secondary pins (single, for light, chassis, brake, ...).
FLOATING CABLE and FLOATING HEADER
are two groups of connector systems that have been developed exclusively for the independent contacting of wing and fuselage. There are no cables and plugs hanging around that could be damaged or dirty. The male connector is contacted directly with the female connector during assembly. This is reliably possible with uniCONNECT because the female connectors are not rigidly connected to the carrier but "floating" and can therefore move with slight movements and vibrations of the wings. Of course, the system is only suitable for rigidly screwed connections.
The two groups CABLE and HEADER only differ in terms of connection. CABLE was primarily developed for reliable solder connections, HEADER is prepared with normal pins for Uni connectors.
All connectors are screwed together from several high-quality fibre optic elements and can be dismantled and maintained at any time. Each connector is offered in two versions:
RTR:
as completely assembled and soldered unit.
DIY:
as a kit for the model builder with all individual parts and screws for your own assembly. Therefore very attractive in price, always delivered as a pair of 2 pieces
