MTTEC XH12-3 Balancer board with XHR plugs
The bottom is covered with a black plastic housing for contact safety.
Intended for connecting Lipo batteries with XHR balancer plug to the 12S Junsi iCharger or other 12S chargers with XH plug connection.
The following plug strips are available on the board:- 2x 3S
- 2x 4S
- 2x 5S
- 2x 6S
- 1x 7S
- 1x 8S
- 1x 9S
- 1x 10S
- 1x 11S
- 1x 12S
This means that the following battery packs can be charged without an additional adapter:- 3S to 12S as a single pack with XH connector strip (socket)
- 2 packs each connected in series - 3S+3S or 4S+4S or 5S+5S or 6S+6S
When connecting 2 packs in series, the balance plug of the battery that is connected to the main minus must always be plugged into the first port on the circuit board. The first port is marked by the long white line on the minus side of the circuit board.
