Description "UNILIGHT 20MM SEARCHLIGHT, 4WX2 WARMWHITE CNC ALU"
Small searchlight with 20mm reflector and x2 chip for best light output. Made entirely of CNC machined aluminium. Including 1-arm mounting bracket and scratch-free nylon bearing.
Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used. Please ensure sufficient cooling air during operation. The headlamps should only be operated in one piece for 5-10 minutes without any further flow.
Technical Data:
Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used. Please ensure sufficient cooling air during operation. The headlamps should only be operated in one piece for 5-10 minutes without any further flow.
Technical Data:
- Power: 4Wx2 reference power
- Voltage: 8V, use for 12V resistor included!
- current: 0.35A
- radiation angle: ~100°
- Luminous intensity: ~190 Lumen WHITE
- Luminous intensity: ~170 Lumen WARM WHITE
- Dimension: D20x17mm
- Weight: 11g (without cable)
- Delivery: with 0.5m connection cable ready assembled and additional resistor for 3S operation
Technical data
Reference power: | 4Wx2 |
---|---|
Voltage [V]: | 8-12V |
Abmessungen: | Ø20x17mm (ohne Kabel) |
Current [A]: | 0,35A |
Weight: | 11g (ohne Kabel) |
angle of reflected beam: | 100° |
Luminosity: | 190 Lumen |