Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

  • headlight 25mm, 4W (white)
  • Pre-assembled with 1m connection cable
  • additional resistor for 3S operation



Reference power: 4W
Voltage [V]: 8V(12V)
Abmessungen: Ø25x23mm
Current [A]: 0,35A
Weight: 8g (ohne Kabel)
angle of reflected beam: ~60°
Color: White
Luminosity: ~100 Lumen

Short, inexpensive high-power spotlight. Compact design as landing light or front ACL. Small heat sink for continuous operation with air cooling.

Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and depend on lamp, operating mode and technology.

Pay attention to the operating temperature, the manufacturer does not assume any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

CSD e.U.
Flurgasse 16
3422 Altenberg
ÖSTERREICH
Tel: 06648408425
[email protected]

UNILIGHT 4W HEADLIGHT 25MM, WHITE
Product number: 9708933
Manufacturer number: SPOT25-040-WE

€14.90*

Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.

  • headlight 25mm, 4W (white)
  • Pre-assembled with 1m connection cable
  • additional resistor for 3S operation



Reference power: 4W
Voltage [V]: 8V(12V)
Abmessungen: Ø25x23mm
Current [A]: 0,35A
Weight: 8g (ohne Kabel)
angle of reflected beam: ~60°
Color: White
Luminosity: ~100 Lumen

Short, inexpensive high-power spotlight. Compact design as landing light or front ACL. Small heat sink for continuous operation with air cooling.

Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and depend on lamp, operating mode and technology.

Pay attention to the operating temperature, the manufacturer does not assume any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

CSD e.U.
Flurgasse 16
3422 Altenberg
ÖSTERREICH
Tel: 06648408425
[email protected]