Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

  • 4W position light, 8mm
  • with 1m silicone cable and pre-assembled resistor for 2S and resistor for 3S included



Reference power: 4W
Voltage [V]: 8(12)V
Abmessungen: D7x29mm Kühlstift/8x18x9mm Kappe
Current [A]: 0.35A
Weight: 4g (ohne Kabel)
angle of reflected beam: >160°
Color: Green
Luminosity: ca.80 Lumen

4W position light, 8mm

Miniature high-power light with 4W reference power for smaller models, on fins or thin wings. The mini lamp is supplied as a fully assembled unit on a CNC-manufactured aluminium heat sink and an enclosed polycarbonate cap as a cover. The cap is specially designed to diffuse the light for better visibility, which must be glued on during installation.

Please note that high-power LEDs can become very warm, up to 70°C is quite normal. Check the operating temperatures after installation.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and are dependent on lamp, operating mode and technology.

Pay attention to the operating temperature, we cannot accept any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

CSD e.U.
Flurgasse 16
3422 Altenberg
ÖSTERREICH
Tel: 06648408425
[email protected]

UNILIGHT 4W MINI-LIGHT 8MM, GREEN
Product number: 9713223
Manufacturer number: MINI-040-GN

€19.90*

Not in stock. Available in approx. 7 to 21 business days.

Privacy

  • 4W position light, 8mm
  • with 1m silicone cable and pre-assembled resistor for 2S and resistor for 3S included



Reference power: 4W
Voltage [V]: 8(12)V
Abmessungen: D7x29mm Kühlstift/8x18x9mm Kappe
Current [A]: 0.35A
Weight: 4g (ohne Kabel)
angle of reflected beam: >160°
Color: Green
Luminosity: ca.80 Lumen

4W position light, 8mm

Miniature high-power light with 4W reference power for smaller models, on fins or thin wings. The mini lamp is supplied as a fully assembled unit on a CNC-manufactured aluminium heat sink and an enclosed polycarbonate cap as a cover. The cap is specially designed to diffuse the light for better visibility, which must be glued on during installation.

Please note that high-power LEDs can become very warm, up to 70°C is quite normal. Check the operating temperatures after installation.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and are dependent on lamp, operating mode and technology.

Pay attention to the operating temperature, we cannot accept any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

CSD e.U.
Flurgasse 16
3422 Altenberg
ÖSTERREICH
Tel: 06648408425
[email protected]