FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

  • 4W position light, 8mm
  • with 1m silicone cable and pre-assembled resistor for 2S and resistor for 3S included



Reference power: 4W
Voltage [V]: 8(12)V
Abmessungen: D7x29mm Kühlstift/8x18x9mm Kappe
Current [A]: 0.35A
Weight: 4g (ohne Kabel)
angle of reflected beam: >160°
Color: White
Luminosity: ca.100 Lumen

4W position light, 8mm

Miniature high-power light with 4W reference power for smaller models, on fins or thin wings. The mini lamp is supplied as a fully assembled unit on a CNC-manufactured aluminium heat sink and an enclosed polycarbonate cap as a cover. The cap is specially designed to diffuse the light for better visibility, which must be glued on during installation.

Please note that high-power LEDs can become very warm, up to 70°C is quite normal. Check the operating temperatures after installation.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and are dependent on lamp, operating mode and technology.

Pay attention to the operating temperature, we cannot accept any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


UNILIGHT
UNILIGHT 4W MINI-LIGHT 8MM, WHITE
Product number: 9713225
Manufacturer number: MINI-040-WE

€19.90*

Prices incl. VAT plus shipping costs

In stock. Usually ships within 1 business day.

  • 4W position light, 8mm
  • with 1m silicone cable and pre-assembled resistor for 2S and resistor for 3S included



Reference power: 4W
Voltage [V]: 8(12)V
Abmessungen: D7x29mm Kühlstift/8x18x9mm Kappe
Current [A]: 0.35A
Weight: 4g (ohne Kabel)
angle of reflected beam: >160°
Color: White
Luminosity: ca.100 Lumen

4W position light, 8mm

Miniature high-power light with 4W reference power for smaller models, on fins or thin wings. The mini lamp is supplied as a fully assembled unit on a CNC-manufactured aluminium heat sink and an enclosed polycarbonate cap as a cover. The cap is specially designed to diffuse the light for better visibility, which must be glued on during installation.

Please note that high-power LEDs can become very warm, up to 70°C is quite normal. Check the operating temperatures after installation.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and are dependent on lamp, operating mode and technology.

Pay attention to the operating temperature, we cannot accept any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


This website uses cookies to ensure the best experience possible. More information...