FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

  • spotlight extra short, 4W (white)
  • Pre-assembled with 1m connection cable
  • additional resistor for 3S operation



Reference power: 4W
Voltage [V]: 8V(12V)
Abmessungen: Ø12(20)x16mm
Current [A]: 0,35A
Weight: 5g (ohne Kabel)
angle of reflected beam: ~110°
Color: White
Luminosity: ~100 Lumen

Extra short version of a 12mm headlight, CNC manufactured aluminium inner reflector very powerful with smallest dimensions. Ideal for installation behind GRP panels, bonnets or on the chassis. As landing light and ACL. Small heat sink for longer operation is already mounted.

Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used. Please ensure sufficient cooling air during operation. The headlamps should only be operated in one piece for 5-10 minutes without any further flow.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and depend on lamp, operating mode and technology.

Pay attention to the operating temperature, the manufacturer does not assume any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


UNILIGHT
UNILIGHT 4W SPOTLIGHT EXTRA SHORT, WHITE
Product number: 9708928
Manufacturer number: SPOT12X-040-WE

€14.90*

Prices incl. VAT plus shipping costs

In stock. Usually ships within 1 business day.

  • spotlight extra short, 4W (white)
  • Pre-assembled with 1m connection cable
  • additional resistor for 3S operation



Reference power: 4W
Voltage [V]: 8V(12V)
Abmessungen: Ø12(20)x16mm
Current [A]: 0,35A
Weight: 5g (ohne Kabel)
angle of reflected beam: ~110°
Color: White
Luminosity: ~100 Lumen

Extra short version of a 12mm headlight, CNC manufactured aluminium inner reflector very powerful with smallest dimensions. Ideal for installation behind GRP panels, bonnets or on the chassis. As landing light and ACL. Small heat sink for longer operation is already mounted.

Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or a 4W adaptation cable (accessory) must be used. Please ensure sufficient cooling air during operation. The headlamps should only be operated in one piece for 5-10 minutes without any further flow.

Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and depend on lamp, operating mode and technology.

Pay attention to the operating temperature, the manufacturer does not assume any warranty for overheating.

Attention: The LED lights are extremely bright! Never look directly into an LED!


This website uses cookies to ensure the best experience possible. More information...