When flying in daylight, every watt of light output counts, all the more visible! But with increasing power, the heat loss of the high-performance LEDs also increases. In order to be able to stay within a small space and low weight, we equip more and more of the strongest lamps with an overtemperature protection... when safety counts!
Very powerful high-power radiator in a compact, low-cost housing. In principle, these headlamps are capable of continuous load, because if it gets too warm, the headlamp simply switches off and protects the lamp and its model from damage. Nevertheless, you should check the temperatures after installation and the service life of the LEDs suffers if they are constantly operated at the upper power limit.
Direct operation with 2S LiPo (8V), with 3S (12V) the enclosed additional resistor must be soldered in or an 8W matching cable (accessory) must be used. Overtemperature protection Switch-off/cycle at 65-70°C.
Information on the reference power is a pure comparison value between the lamps offered. They normally refer to an operating voltage of 12V/3S Lipo and depend on lamp, operating mode and technology.
Pay attention to the operating temperature, the manufacturer does not assume any warranty for overheating.
Attention: The LED lights are extremely bright! Never look directly into an LED!
